EL-USB-2-LCD+ Lascar Electronics, EL-USB-2-LCD+ Datasheet - Page 4

• Manufacturer Part Number: EL-USB-2-LCD+
• Description: TEMP/RH USB DATA LOGGER, LCD, 2-1/2 DIGIT
• Manufacturer: Lascar Electronics

Specifications of EL-USB-2-LCD+

• Accuracy: ±2.0 %RH
• Humidity: 0-100 %RH
• Sample Rate: Every 10 Second to Every 12 Hours
• Temperature Accuracy: ±0.3 (±0.6) °C (°F)
• Temperature, Range, Measuring: –35 (–31) to 80 (176) °C (°F)
• Lead Free Status / Rohs Status: RoHS Compliant part

EL-USB-2-LCD+
EL-USB-2-LCD+
High Accuracy Humidity, Temperature and Dew Point Data Logger with LCD
High Accuracy Humidity, Temperature and Dew Point Data Logger with LCD
DIMENSIONS
All dimensions in mm (inches)
126.0 (4.9)
MEASUREMENT ACCURACY
BATTERY REPLACEMENT
We recommend that you replace the battery every 12 months, or prior to logging critical data.
The EL-USB-2-LCD+ does not lose its stored readings when the battery is discharged or when the battery is replaced; however, the data
logging process will be stopped and cannot be re-started until the battery has been replaced and the logged data has been downloaded
to a PC.
Only use 3.6V 1/2AA lithium batteries. Check with your supplier that the battery you are ordering is ‘press À t’ and is not À tted with solder
tags. Before replacing the battery, remove the EL-USB-2-LCD+ from the PC.
Note:
Leaving the EL-USB-2-LCD+ plugged into the USB port for longer than necessary will cause some of the battery capacity to be lost.
WARNING
Handle lithium batteries carefully, observe warnings on battery casing. Dispose of in accordance with local regulations.
www.lascarelectronics.com
SpeciÀ cations liable to change without prior warning
Issue 1
10/09
S.C
Applies to EL-USB-2-LCD+
Page 4 of 5