FP0-E16RS-A Panasonic Electric Works, FP0-E16RS-A Datasheet - Page 18

• Manufacturer Part Number: FP0-E16RS-A
• Description: Programmable Controller, Analog Input/Output Unit; DC; Relay; 24 VDC; LED
• Manufacturer: Panasonic Electric Works
• Type: I/Or

Specifications of FP0-E16RS-A

• Brand/series: FP0 Series
• Dimensions: 71 mm L x 25 mm W x 90 mm H
• Display Type: LED
• Input Type: DC
• Max. Number Of Expansion I/o Points: 300 Points
• Max. Number Of Expansion Modules: 3
• Memory Type: Flash ROM Built-In (Program Memory) No Battery Backup Required
• Number Of Inputs: 8 (Channel)
• Number Of Outputs: 8 (Channel)
• Output Type: Relay
• Primary Type: Expansion
• Programmable With: FP0 adapter
• Standards: Conforming to EN61131-2
• Voltage, Supply: 24 VDC
• Lead Free Status / Rohs Status: RoHS Compliant part
• For Use With: Modular Controllers

FP0 Series
Specification tables
Note: (*): Since the response time of X0 to X5 is very fast (for high-speed counter input), the FP0 happens to catch chattering noise as an input signal.
1) Relay output type
The FP0 series conforms to the following standards under the EMC Directive
and the Low Voltage Directive.
EMC Directive (89/336/EEC)
EN 50081-2: 1993
EN 50082-2: 1995
18
Item
Programming TOOL-Port
Communication COM-Port
Item
Insulation method
Rated input voltage
Operating voltage range
Rated input current
Input points per common
ON voltage/ON current
OFF voltage/OFF current
Input impedance
Response time
Operating indicator
Item
Output type
Rated control capacity
Response time
Life
Surge absorber
Operation indicator
Interfaces
Input specifications
Output specifications
To prevent this, it is recommended that timer instruction should be included in the program.
OFF
ON
Mechanical
Electrical
OFF
ON
OFF
ON
OFF
ON
Normally open(1 Form A)
10ms or less
8ms or less
20million operations or more
100k operations or more
None
LED display
2A 250VAC, 2A 30VDC(4.5A/common)
Optical coupler
24VDC
21.6 to 26.4VDC
4.3mA or less (at 24VDC)
6 points/common (C10RS) 8 points/common (C14RS,C16T/C16P,E16T/E16P) 16 points/common (C32T/C32P,E32T/E32P)
19.2V or less/ 3mA or less
2.4V or more/ 1mA or more
Approx. 5.6k
50µs or less (at X0,X1)(*)
100µs or less (at X2 to X5)
2ms or less (at X6 to XF)
same as above
LED display
Low Voltage Directive (73/23/EEC)
VDE 0160: 1988 (EN 50178: 1995)
(Overvoltage Category II,
non-mains-circuit, pollution degree 2)
EN 61131-2: 1995
Description
RS232, mini DIN socket (5 pin), 9600 or 19200 BAUD, (8 data bits, odd parity, 1 stop bit), Computer link for
programming and communication with MEWTOCOL.COM, user configurable modem connection
RS232 (SD, RD, GND) 3 way screw terminal, 300 to 19200 BAUD, (7 or 8 data bits, none/even/odd parity,
1 or 2 stop bits, start code: none/STX, end code: CR/CR+LF/ETX/none, CCU mode for programming and
communication with MEWTOCOL.COM, user configurable modem connection, GENERAL PURPOSE MODE
controlled by program for general purpose RS232 communication.
10/2004
2) Transistor output type
Notes:
(*1): 8points/common(C16T/C16P,E16T/E16P), 16points/common(C32T/C32P,
(*2): 50µs or less at Y0, Y1 only
Item
Insulation method
Output type
Rated load voltage
Load voltage allowable range
Max. load current
Max. inrush current
Leakage current at OFF time
Max. voltage down at ON time
External power
supply
(For internal circuit)
Response time
Surge absorber
Operating indicator
T32CP, E32T/E32P)
Description
Description
OFF
ON
Voltage
Current
OFF
ON
Optical coupler
Open collector
24VDC 5 to 24VDC
4.75 to 26.4VDC
0.1A/points(at DC26.4V) (1A/common)(*1)
0.3A
100µA or less
1.5V or less
21.6 to 26.4VDC
240mA or less
1ms or less
1ms or less(*2)
Zener diode
LED display
Description