D-M9N SMC Corporation, D-M9N Datasheet - Page 91

• Manufacturer Part Number: D-M9N
• Description: Sensor, solid state, direct mount, grommet connection, for MX/MH/CQ2/NCQ2/NCQ8
• Manufacturer: SMC Corporation
• Type: Hall Effectr

Specifications of D-M9N

• Function: Proximity
• Primary Type: Proximity
• Technology: Hall Effect

∗ To protect auto switches, ensure that main body of an auto switch should
How to Mount and Move the Auto Switch
<Applicable auto switch>
Reed switch·············· D-Z73/Z76/Z80
Solid state switch····· D-Y59 /Y69 , D-Y7P(V)
Note) When tightening an auto switch mounting screw, use a
1. Fix it to the detecting position with a set screw by installing a mounting
2. Fit an auto switch into the switch mounting groove to set it roughly to the
3. After confirming the detecting position, tighten up the mounting screw
4. When changing the detecting position, carry out in the state of 2.
Auto Switch Mounting Bracket Part No.
6-16-70
be embedded into auto switch mounting groove with a depth of 15 mm or
more.
Mounting Bracket
CDS1, CDL1, CDLS
MDB, MBB, MDNB
CDL1, CDNA
(Use hexagon wrench)
Applicable cylinder
bracket in cylinder tie-rod and letting the bottom surface of a mounting
bracket contact the cylinder tube firmly.
mounting position for an auto switch.
attached to an auto switch, and secure the switch.
Hexagon socket head set screw
Series MB, CA1: M4 x 0.7 x 6
Watchmakers’ (precision) screwdriver
watchmaker’s screwdriver with a grip diameter of 5 to 6 mm.
Also, set the tightening torque to be 0.05 to 0.1 N·m.
As a guide, turn 90° from the position where it comes to feel
tight. Set the tightening torque of a hexagon socket head set
screw (M4 x 0.7) to be 1 to 1.2 N·m.
Series CS1: M4 x 0.7 x 8
Technical Data 2:
How to Mount and Move the Auto Switch
Bore size (mm)
125, 140
80, 100
80, 100
32, 40
50, 63
40, 50
D-Y7NW(V)/Y7PW(V)/Y7BW(V)
D-Y7BAL
Tie-rod Mounting Style
160
180
200
63
l
l
A
B
BMB4-032
BMB4-050
Mounting
BA4-063
BA4-040
BA4-063
BA4-080
BS4-125
BS4-160
BS4-180
BS4-200
A
B
Switch mounting bracket
Auto switch
mounting screw
Auto switch
socket head
socket head
(M4 x 0.7 x 6
(M4 x 0.7 x 8
Quantity: 2
Quantity: 2
Accessory
set screw
set screw
Hexagon
Hexagon
l
l
)
)
Auto Switch Mounting Bracket Part No.
(Including bracket, screw)
<Applicable auto switch>
Solid state switch······D-P5DWL
How to Mount and Move the Auto Switch
1. (For MDB)
2. (For MDB)
3. Place the concave part of the switch mounting bracket into the cylinder
4. After reconfirming the detecting position, tighten the M3 mounting screw
5. Tighten up M4 screw of switch mounting bracket to secure the switch
MDB, MDBB, MDNB
CDL1, CDNA
MDB, MDBB, MDNB
CDNA,
CDL1, (ø
Cylinder series
Slightly screw the hexagon socket head cap screw (M4 x 0.7 x 8 l) into
the M4 tapped portion of switch mounting bracket. (2 locations) Use
caution that the tip of the hexagon socket head cap screw should not
stick out to the concave portion of switch mounting bracket.
Put a round head Phillips screw (M3 x 0.5 x 14 l) through the auto
switch's through-hole (2 locations), and then push it down into the M3
tapped part on the switch mounting bracket while turning it lightly.
tie-rod, and slide the switch mounting bracket in order to set roughly to
the detecting position.
to secure the auto switch by making the bottom face of auto switch
attached to the cylinder tube. (Tightening torque of M3 screw should be
0.5 to 0.7 N·m.)
mounting bracket. (Ensure that tightening torque of M4 screw should be
set 1.0 to 1.2 N·m.)
Hexagon socket head set screw
M4 x 0.7 x 6
Hexagon socket head cap screw
M4 x 0.7 x 8
40 to
l
l
ø
100)
BMB3T-040
32
—
Tie-rod
Tie-rod
BMB3T-040
BAP2-040
40
Applicable bore size (mm)
BMB3T-050
BAP2-040
50
With spring washer, M3 x 0.5 x 14
BMB3T-050
BAP2-063
Round head Phillips screw
M3 x 0.5 x 14
Hexagon socket head cap bolt
63
Switch mounting bracket
Auto switch
Switch mounting bracket
Auto switch
BMB3T-080
BAP2-080
80
l
BMB3T-080
BAP2-080
100
l