DP-100-CLEAR 3M, DP-100-CLEAR Datasheet - Page 6

• Manufacturer Part Number: DP-100-CLEAR
• Description: Adhesive; Epoxy; Clear
• Manufacturer: 3M

Specifications of DP-100-CLEAR

• Chemical Component: Epoxy Resin
• Chemical System: Epoxy
• Color: Clear
• Dispensing Method: Syringe
• Primary Type: Adhesive
• Time, Drying: Air Dry for 15 minutes, Force Dry for 10 minutes @ 66 °C +⁄- 5 °C (Aluminum Surface), If 3M™ Scotch-Weld™ Structural Primer 1945 B⁄A is Used, Apply a Thin Coating (0.5 mils) on the Metal Surfaces to be Bonded, Air Dry for 10 minutes, then Cure for 30 minu
• Time, Setting: 15 min. (Aluminum), 10 min. (Steel)
• Weight: 1.7 Oz.
• Lead Free Status / Rohs Status: RoHS Compliant part

Dust created by cutting, grinding, sanding, or machining may cause eye irritation. Signs/symptoms may include redness, swelling,
pain, tearing, and blurred or hazy vision.
Skin Contact:
Moderate Skin Irritation: Signs/symptoms may include localized redness, swelling, itching, and dryness.
Prolonged or repeated exposure may cause:
Inhalation:
Vapors released during curing may cause irritation of the respiratory system. Signs/symptoms may include cough, sneezing, nasal
discharge, headache, hoarseness, and nose and throat pain.
Dust from cutting, grinding, sanding or machining may cause irritation of the respiratory system. Signs/symptoms may include cough,
sneezing, nasal discharge, headache, hoarseness, and nose and throat pain.
Ingestion:
Gastrointestinal Irritation: Signs/symptoms may include abdominal pain, stomach upset, nausea, vomiting and diarrhea.
4.1 FIRST AID PROCEDURES
The following first aid recommendations are based on an assumption that appropriate personal and industrial hygiene practices are
followed.
Eye Contact: Flush eyes with large amounts of water. If signs/symptoms persist, get medical attention.
Skin Contact: Remove contaminated clothing and shoes. Immediately flush skin with large amounts of water. Get medical
attention. Wash contaminated clothing and clean shoes before reuse.
Inhalation: If signs/symptoms develop, remove person to fresh air.
If Swallowed:
give anything by mouth to an unconscious person. Get medical attention.
5.1 FLAMMABLE PROPERTIES
_________________________________________________________________________________________________
3M MATERIAL SAFETY DATA SHEET 3M(TM) Scotch-Weld(TM) Epoxy Adhesive DP-100 Clear (Part B)
SECTION 4: FIRST AID MEASURES
SECTION 5: FIRE FIGHTING MEASURES
Autoignition temperature
Flash Point
Flammable Limits - LEL
Allergic Skin Reaction (non-photo induced): Signs/symptoms may include redness, swelling, blistering, and itching.
Do not induce vomiting unless instructed to do so by medical personnel. Give victim two glasses of water. Never
No Data Available
249 ºC [Test Method: Pensky-Martens Closed Cup]
Not Applicable
If signs/symptoms persist, get medical attention.
Page
2 of 7