ES-FA-9AA BANNER ENGINEERING, ES-FA-9AA Datasheet - Page 14

• Manufacturer Part Number: ES-FA-9AA
• Description: Module; Relay; Red LED; 24; UL Listed
• Manufacturer: BANNER ENGINEERING

Specifications of ES-FA-9AA

• Light Source: Red LED
• Coil Voltage Vac Nom: 24V
• Coil Voltage Vdc Nom: 24V
• Contact Current Max: 6A
• Contact Voltage Ac Nom: 250V
• Contact Voltage Dc Nom: 250V
• Contact Configuration: 3PST-NO
• No. Of Poles: 3
• Lead Free Status / Rohs Status: RoHS Exempt Product

14
Category
Output Response Time
Input Requirements
Minimum OFF-State Recov-
ery Time
Indicators
Construction
Mounting
Vibration Resistance
Operating Conditions
Design Standards
Certifications
Banner Engineering Corp. - Minneapolis, MN USA - www.bannerengineering.com
Specification
Mechanical life: > 20,000,000 operations
Electrical life (switching cycles of the output contacts, resistive load): 150,000
cycles @ 1,500 VA; 1,000,000 cycles @ 450 VA; 2,000,000 cycles @ 250 VA;
5,000,000 cycles @ 125 VA
NOTE: Transient suppression is recommended when switching inductive
loads. Install suppressors across load. Never install suppressors across output
contacts (see Warning, Wiring of Arc Suppressors).
25 milliseconds typical
Safety input switch:
Reset switch: 20 mA @ 12V dc, hard contact only
250 ms
3 green LED indicators: Power ON , K1 energized, K2 energized
Polycarbonate housing. Rated NEMA 1, IEC IP40; Terminals IP20
Mounts to standard 35 mm DIN rail track. Safety Module must be installed inside an
enclosure rated NEMA 3 (IEC IP54), or better.
10 to 55Hz @ 0.35 mm displacement per IEC 60068-2-6
Temperature: 0° to +50°C (+32° to 122°F)
Max. Relative Humidity: 90% @ +50°C (non-condensing)
Cat. 4 PL e per EN ISO 13849-1; SIL 3 per IEC 61508 and IEC 62061
Dual-Channel (contacts) hookup – 10 to 20 mA steady state @ 12V dc
NOTE: Inputs are designed with a brief contact-cleaning current of 100 mA when
initially closed.
Single-Channel hookup – 40 to 100 mA @ 24V ac/dc +/- 10%; 50/60 Hz
Tel: [phone]
Emergency
Stop
Devices
29YL
ES-FA-9AA / ES-FA-11AA E-Stop Safety Modules
P/N 060606 rev. E