CTSR-12 Chemtronics, CTSR-12 Datasheet - Page 3

• Manufacturer Part Number: CTSR-12
• Description: Chemical, Silicone Conformal Coating, 10 Oz, Aerosol Can
• Manufacturer: Chemtronics
• Type: Conformalr

Specifications of CTSR-12

• Application: For applications where flexibility and high temperature resistance are required.
• Chemical Component: Acetone/Isobutane/Isohexane/Propane/Propylene Glycol Methyl Ether Acetate/Silicone Polymer/Toluene
• Dielectric Strength: 1100 V⁄mil
• Dispensing Method: Aerosol
• Primary Type: Coating
• Standards: UL Recognized
• Temperature Range: -64 to +200 °C
• Temperature, Rating: -65 to +200 °C
• Time, Setting: 15 min.
• Weight: 11 Oz.
• Lead Free Status / Rohs Status: RoHS Compliant part Hazardous Materials

ITW CHEMTRONICS
SECTION 1: CHEMICAL PRODUCT AND COMPANY INFORMATION
Product Identification
Product Code: CTSR-12, CTSR-12C
SECTION 2: COMPOSITION/INFORMATION ON INGREDIENTS
Chemical Name
Isohexane, a mixture of:
Acetone
Silicone polymer
Propane
Isobutane
Propylene glycol methyl ether acetate
Toluene
SECTION 3: HAZARD IDENTIFICATION
Emergency Overview: Translucent, slightly green liquid with hydrocarbon odor. This product is extremely flammable. Liquid will irritate eyes and skin under repeated
or prolonged exposure. Breathing high concentrations of product vapor may produce drowsiness and a headache.
Potential Health Effects:
Eyes:
Skin:
Ingestion: Harmful if swallowed. Irritating to mouth, throat and stomach. May cause optic nerve damage.
Inhalation: Harmful if inhaled. High concentrations of vapors in immediate area can displace oxygen and can cause dizziness, unconsciousness, and even death with
longer exposure. Keep people away from such vapors without self-contained breathing apparatus.
Pre-Existing Medical Conditions Aggravated by Exposure: Heart, lung, skin, eye.
SECTION 4: FIRST AID MEASURES
Eyes:
and tested by medical personnel if irritation develops or persists.
Skin: Wash skin with soap and water. Remove contaminated clothing. Get medical attention if irritation develops or persist. Wash clothing separately before reuse.
Ingestion: Do not induce vomiting. Get immediate medical attention.
Inhalation: Remove to fresh air. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Get medical attention.
SECTION 5: FIRE FIGHTING MEASURES
Flash Point: 60°F (16C) (liquid only TCC)
Extinguishing Media: Use alcohol foam, carbon dioxide, or water spray when fighting fires involving this material.
Fire Fighting Instructions: As in any fire wear self-contained breathing apparatus (pressure-demand, MSHA/NIOSH approved or equivalent) and full protective gear.
SECTION 6: ACCIDENTAL RELEASE MEASURES
Large Spills: Shut off leak if possible and safe to do so. Wear self-contained breathing apparatus and appropriate personal protective equipment. Absorb spill with
inert material (e.g. dry sand or earth), then place in a chemical waste container for proper disposal. Do not flush to sewer. Avoid runoff into storm sewers and ditches
which lead to waterways. Small Spills: Absorb spill with inert material (e.g. dry sand or earth), then place in a chemical waste container for proper disposal.
SECTION 7: HANDLING AND STORAGE
Avoid prolonged or repeated contact with eyes, skin, and clothing. Wash hands before eating. Use with adequate ventilation. Avoid breathing product vapor or mist.
Do not reuse this container. Store in a cool dry place away from heat, sparks and flame. Keep container closed when not in use. Do not store in direct sunlight.
KEEP OUT OF REACH OF CHILDREN.
SECTION 8: EXPOSURE CONTROLS/PERSONAL PROTECTION
Exposure Guidelines:
CHEMICAL NAME
Toluene
Acetone
Isohexanes
n-hexane
Propylene glycol methyl ether acetate
Work/Hygienic Practices: Good general ventilation should be sufficient to control airborne levels. Local exhaust ventilation may be necessary to control any air
contaminants to within their TLVs during the use of this product. If vapor concentration exceeds TLV, use NIOSH approved organic vapor cartridge respirator. Wear
safety glasses with side shields (or goggles) and rubber or other chemically resistant gloves when handling this material.
NFPA and HMIS Codes:
Health
Flammability
Reactivity
Personal Protection
3-methylpentane
2,3-dimethylbutane
2,2-dimethylbutane
2-methylpentane
n-hexane
Liquid, aerosols and vapors of this product are irritating and can cause pain, tearing, reddening and swelling accompanied by a stinging sensation.
Contact causes skin irritation.
Immediately flush with plenty of water. After initial flushing, remove any contact lenses and continue flushing for at least 15 minutes. Have eyes examined
Product Information: 800-TECH-401
®
LEL/UEL: Not established (% by volume in air)
ACGIH TLV
20 ppm
500 ppm
500ppm
50 ppm
NA
(Formerly Konform SR 2000)
KONFORM
CAS#
96-14-0
79-29-8
75-83-2
107-83-5
110-54-3
67-64-1
68952-93-2
74-98-6
75-28-5
108-65-6
108-88-3
NFPA
Page 1 of 2
-
2
3
1
®
SR
OSHA PEL
200 ppm
1000 ppm
NA
500 ppm
NA
Wt. % Range
ACGIH STEL
300 ppm Ceiling
750 ppm
1000ppm
NA
NA
HMIS
15.0-20.0
10.0-15.0
10.0-15.0
10.0-15.0
10.0-15.0
5.0 -10.0
5.0- 10.0
5.0 -10.0
0.1 -1.0
5.0-10.0
2.0 -5.0
B
2
3
1
MSDS #0710