CTSR-12 Chemtronics, CTSR-12 Datasheet - Page 2

• Manufacturer Part Number: CTSR-12
• Description: Chemical, Silicone Conformal Coating, 10 Oz, Aerosol Can
• Manufacturer: Chemtronics
• Type: Conformalr

Specifications of CTSR-12

• Application: For applications where flexibility and high temperature resistance are required.
• Chemical Component: Acetone/Isobutane/Isohexane/Propane/Propylene Glycol Methyl Ether Acetate/Silicone Polymer/Toluene
• Dielectric Strength: 1100 V⁄mil
• Dispensing Method: Aerosol
• Primary Type: Coating
• Standards: UL Recognized
• Temperature Range: -64 to +200 °C
• Temperature, Rating: -65 to +200 °C
• Time, Setting: 15 min.
• Weight: 11 Oz.
• Lead Free Status / Rohs Status: RoHS Compliant part Hazardous Materials

USAGE INSTRUCTIONS
For industrial use only.
Read MSDS carefully prior to use.
Before applying Konform
clean circuit boards to remove contamination and
allow to dry. Cleaning may be performed with
Chemtronics
Acetone.
SPRAY APPLICATION: Apply top to bottom,
allowing coating to flow evenly around components.
Rotate PCB 90° and repeat application. Rotate and
apply coating two additional times, then allow board
to cure. If additional thickness is desired, apply
additional coatings. When using liquid spray with
automatic dispensing equipment, adjustments may
be required in application rate and viscosity.
DIP APPLICATION: Using automatic equipment
or hand immersion technique, slowly immerse PCB
into the coating and remove slowly. Use an average
rate of approximately 1 foot per minute. After
allowing the board to cure, process may be repeated
to achieve desired thickness.
BRUSH APPLICATIONS: Evenly apply coating
to areas desired at thickness required. Allow time
for curing before reapplying to achieve a thick
coating. Use Chemask
during conformal coating process. After application,
cured Konform
Chemtronics
aromatic solvent (such as xylene), or a short chain
ketone (such as acetone).
AVAILABILITY
CTSR-12
CTSR1
Moisture Resistance
Removability
Ease of Repair
Flexibility
Adhesion
Abrasion Resistance
Solvent Resistance
11 oz. Aerosol
1 Gal. Liquid
®
®
Electro-Wash
Electro-Wash
®
SR may be removed by soaking in
Performance
®
to protect components
®
SR conformal coatings,
CTSR5
®
®
NX or High Purity
Two Step, or an
Excellent
Excellent
Excellent
Excellent
Excellent
Fair
Good
5 Gal. Liquid
ENVIRONMENTAL IMPACT DATA
CFC, HCFC, CL. SOLV., VOC, and HFC numbers
shown are the content by weight. Ozone depletion
potential (ODP) is determined in accordance with
the Montreal Protocol and U.S. Clean Air Act of
1990. The ODP of this product is 0.0. It is the sum
of the ODP of the substances that may contribute to
the depletion of stratospheric ozone, based upon the
weight of each substance in the product’s
formulation.
NOTE:
is intended for professional end users having the skills to
evaluate and use the data properly. CHEMTRONICS
does not guarantee the accuracy of the data and assumes
no liability in connection with damages incurred while
using it.
Chemtronics®, Electro-Wash®, Chemask
registered trademarks of ITW Chemtronics.
reserved.
CFC
HCFC
Cl. Solv.
ENVIRONMENTAL IMPACT DATA
This information is believed to be accurate. It
(For Aerosol Product)
0.0%
0.0%
0.0%
VOC
HFC
ODP
®
,and Konform® are
All rights
88.0%
0.0%
0.00
®