MAP55-4002 POWER ONE, MAP55-4002 Datasheet - Page 2

• Manufacturer Part Number: MAP55-4002
• Description: Linear & Switching Power Supplies Book as (MAPxx-xxxx)
• Manufacturer: POWER ONE
• Type: Commercial, Industrialr

Specifications of MAP55-4002

• Brand/series: MAP55 Series
• Configuration: Open-Frame
• Current, Input: 1.6 A (RMS) @ 90 VAC
• Current, Leakage: 500 μA (Max.)
• Dimensions: 6 in. L x 3.27 in. W
• Hold Time: 20 mS (Min.)
• Mounting Type: Panel
• Number Of Outputs: 4
• Operation: Switching
• Output: -12 VDC @ 0.5 A, +5 VDC @ 6 A, +12 VDC @ 0.5 A, +12 VDC @ 3 A
• Power, Output: 55 W
• Power, Rating: 55 W (Continuous)
• Primary Type: AC-DC
• Temperature, Operating: 50 °C
• Voltage, Input: 110/220 VAC
• Voltage, Output: -12, +5, +12, +12 VDC
• Voltage, Output 1: 5 V
• Voltage, Output 2: -5 V
• Voltage, Output 3: 12 V
• Voltage, Output 4: -12 V
• En61000-4-2 Esd Level 4 (8 Kv): All Map Products
• En61000-4-3 Radiated Level 3 (10 V/m): All Map Products
• Universal Input: 90-132 VAC or 175-264 VAC
• Output Current (max): 6/3/0.5/0.5A
• Input Voltage: 90 to 132/175 to 264V
• Output Voltage: 5/12/-12/12V
• Output Power (max): 55W
• Input Frequency: 47 to 63Hz
• Efficiency: 73%
• Screening Level: Commercial
• Product Length (mm): 83.1mm
• Product Height (mm): 40.6mm
• Product Depth (mm): 152.4mm
• Operating Temperature Min Deg. C: 0C
• Operating Temperature Max Deg. C: 70C
• Mounting Style: Screw
• Pin Count: 11
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

NUCLEAR AND MEDICAL APPLICATIONS - Power-One products are not designed, intended for use in, or authorized for use as critical components
in life support systems, equipment used in hazardous environments, or nuclear control systems without the express written consent of the respective
divisional president of Power-One, Inc.
TECHNICAL REVISIONS - The appearance of products, including safety agency certifications pictured on labels, may change depending on the date
manufactured. Specifications are subject to change without notice.
JUL 14, 2006 revised to AUG 10, 2006
Input Specifications
PARAMETER
Input Voltage - AC
Input Frequency
Brown Out Protection
Hold-up Time
Input Current
Input Protection
Inrush Surge Current
Operating Frequency
Output Specifications
PARAMETER
Efficiency
Minimum Loads
Ripple and Noise
Output Power
Overshoot / Undershoot
Regulation
Transient Response
Turn-on Delay
Turn-on Rise Time
NOTES:
Interface Signals and Internal Protection
PARAMETER
Overvoltage Protection
Overload Protection
Safety, Regulatory, and EMI Specifications
PARAMETER
Agency Approvals
Dielectric Withstand
Voltage
Electromagnetic
Interference,
Conducted
Insulation Resistance
Leakage Current
1) Nominal rise time for MAP55-1024 is 36 msec.
CONDITIONS/DESCRIPTION
Continuous input range.
AC input.
Lowest AC input voltage that regulation is maintained with full rated loads.
Nominal AC Input Voltage (115VAC), full rated load.
90 VAC (55W load).
Non-user serviceable internally located AC input line fuse.
Internally limited by thermistor. Vin = 264VAC (one cycle). 25° C.
Switching frequency of power supply (varies with load).
CONDITIONS/DESCRIPTION
Full load, 115VAC. Varies with distribution of loads among outputs.
MAP55-1012
MAP55-1024
MAP40-1005 and all multiple output models, main channel only.
Full load, 20MHz bandwidth.
Continuous output power, all multiple output models.
Peak output power (60s maximum, 10% duty cycle), all multiple output models.
Output voltage overshoot/undershoot at turn-on, V1, V2.
Varies by output. Total regulation includes: line changes from 90-132 VAC or 175-264 VAC,
changes in load starting at 20% load and changing to 100% load.
Recovery time, to within 1% of initial set point due to a 50-100%
load change, 4% max. deviation. (Main output of multiple output units).
Time required for initial output voltage stabilization.
Time required for output voltage to rise from 10% to 90% (Note 1).
CONDITIONS/DESCRIPTION
Fully protected against output overload and short circuit. Automatic recovery upon removal of overload condition.
CONDITIONS/DESCRIPTION
UL1950.
CSA 22.2 No. 234/950.
EN60950 (TUV).
Input to output.
FCC CFR title 47 Part 15 Sub-Part B - conducted & radiated.
EN55022 / CISPR 22 conducted.
EN55022 / CISPR 22 radiated.
Input to output.
Per EN60950, 264VAC.
Main output only of multiple output units.
Page 2 of 3
MAP55 AC-DC Series Data Sheet
MAP40-1005
MAP55-1012
MAP55-1024
2600
0.21
0.11
0.50
17.5
32.0
175
MIN
MIN
MIN
MIN
5.5
5.6
90
47
90
20
22
73
B
B
A
1
7
NOM
NOM
NOM
NOM
1.6
See Model Selection Chart.
7
See Model Selection Chart.
www.power-one.com
Approved.
19.7
36.0
MAX
132
264
180
MAX
500
MAX
MAX
500
6.8
6.8
63
38
55
65
1
4
Amps
Watts
Watts
UNITS
A
UNITS
UNITS
UNITS
Class
VDC
VAC
VAC
MΩ
A
kHz
Sec
ms
ms
µA
Hz
μs
RMS
%
%
V
PK