PKB4110CPI Ericsson Power Modules, PKB4110CPI Datasheet - Page 38

• Manufacturer Part Number: PKB4110CPI
• Description: DC/DC Converters & Regulators 3.3Vdc 40A Isolated Input 36-75V 132W
• Manufacturer: Ericsson Power Modules
• Series: PKB-Cr

Specifications of PKB4110CPI

• Product: Isolated
• Output Power: 132 W
• Input Voltage Range: 36 V to 75 V
• Number Of Outputs: 1
• Output Voltage (channel 1): 3.3 V
• Output Current (channel 1): 40 A
• Isolation Voltage: 2.25 KV
• Package / Case Size: Eighth Brick
• Output Type: Isolated
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

E
Soldering Information — Through Hole Mounting
The through hole mount version of the product is intended for
manual or wave soldering. When wave soldering is used, the
temperature on the pins is specified to maximum 270°C for
maximum 10 seconds.
A maximum preheat rate of 4°C/s and a temperature of max
+150°C is suggested. When soldering by hand, care should
be taken to avoid direct contact between the hot soldering
iron tip and the pins for more than a few seconds in order to
prevent overheating.
A no-clean flux is recommended to avoid entrapment of
cleaning fluids in cavities inside the product or between the
product and the host board. The cleaning residues may affect
long time reliability and isolation voltage.
Delivery Package Information, Surface Mount
Version
The surface mount versions of the products are delivered in
antistatic injection molded trays (Jedec design guide 4.10D
standard.
Prepared (also subject responsible if other)
MICJAN
Approved
MPM/BK/P [Natalie Johansson]
PKB4000C series
DC/DC converters, Input 36-75 V, Output 60A/144W
Tray Specifications
Material
Surface resistance
Bakability
Tray capacity
Tray thickness
Box capacity
Tray weight
PPE, Antistatic
10
The trays can be baked at maximum
125°C for 48 hours
20 products/tray
14.4 mm [0.567 inch]
100 products (5 full trays/box)
110 g empty, 530 g full tray
5
< Ohm/square < 10
12
Checked
See §1
Dry Pack Information
The surface mount versions of the products are delivered in
trays These inner shipment containers are dry packed in
standard moisture barrier bags according to IPC/JEDEC
standard J-STD-033 (Handling, packing, shipping and use of
moisture/reflow sensitivity surface mount devices).
Using products in high temperature Pb-free soldering
processes requires dry pack storage and handling. In case
the products have been stored in an uncontrolled
environment and no longer can be considered dry, the
modules must be baked according to J-STD-033.
Delivery Package Information, Through Hole
versions
The products are delivered in antistatic trays.
Ericsson Internal
PROD. SPECIFICATION MECHANICAL
No.
5/1301-BMR 655 Uen
Date
2007-05-29
Tray Specifications
Material
Surface resistance
Bakability
Tray capacity
Tray thickness Open
Frame version
Tray thickness Base
Plate version
Box capacity Open
Frame version
Box capacity Base Plate
version
Tray weight Open Frame
version
Tray weight Base Plate
version
Technical Specification
EN/LZT 146 377 R3H
© Ericsson AB
Rev
B
PE foam, antistatic.
10
The trays are not bakable
25 products/tray
18 mm [0.71 inch]
22 mm [0.87 inch]
100 products (4 full trays/box)
50 products (2 full trays/box)
30 g empty, 550 g full tray
40 g empty, 1040 g full tray
5
Reference
< Ohm/square < 10
Feb 2009
12
2 (4)
38