ENC28J60/SS Microchip Technology, ENC28J60/SS Datasheet - Page 32

• Manufacturer Part Number: ENC28J60/SS
• Description: IC ETHERNET CTRL 8K W/SPI 28SSOP
• Manufacturer: Microchip Technology

Specifications of ENC28J60/SS

• Package / Case: 28-SSOP
• Controller Type: Ethernet Controller, MAC/10Base-T
• Interface: SPI
• Voltage - Supply: 3.1 V ~ 3.6 V
• Current - Supply: 160mA
• Operating Temperature: 0°C ~ 70°C
• Mounting Type: Surface Mount
• Input Voltage Range (max): 5.5 V
• Maximum Operating Temperature: + 70 C
• Minimum Operating Temperature: 0 C
• Mounting Style: SMD/SMT
• Operating Supply Voltage: 3.1 V to 3.6 V
• Supply Current (max): 180 mA
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With: DM163024 - BOARD DEMO PICDEM.NET 2AC164123 - BOARD DAUGHTER ETH PICTAIL PLUSAC164121 - BOARD DAUGHTER PICTAIL ETHERNET
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

ENC28J60
4.2.7
The System Reset Command (SRC) allows the host
controller to issue a System Soft Reset command.
Unlike other SPI commands, the SRC is only a single
byte command and does not operate on any register.
FIGURE 4-7:
DS39662C-page 30
SCK
CS
SO
SI
SYSTEM RESET COMMAND
1
SYSTEM RESET COMMAND SEQUENCE
0
Opcode
1
1
1
2
High-Impedance State
1
3
Preliminary
Data Constant (1Fh)
1
4
The command is started by pulling the CS pin low. The
SRC opcode is the sent, followed by a 5-bit Soft Reset
command constant of 1Fh. The SRC operation is
terminated by raising the CS pin.
Figure 4-7 shows a detailed illustration of the System
Reset Command sequence. For more information on
SRC’s Soft Reset, refer to Section 11.2 “System
Reset”.
1
5
1
6
1
7
© 2008 Microchip Technology Inc.