MCP2140A-I/SO Microchip Technology, MCP2140A-I/SO Datasheet - Page 7

• Manufacturer Part Number: MCP2140A-I/SO
• Description: IC IRDA CONTROLLR DTE/DCE 18SOIC
• Manufacturer: Microchip Technology

Specifications of MCP2140A-I/SO

• Package / Case: 18-SOIC (7.5mm Width)
• Controller Type: IRDA Standard Protocol Stack Controller
• Interface: UART
• Voltage - Supply: 3 V ~ 5.5 V
• Current - Supply: 2.2mA
• Operating Temperature: -40°C ~ 125°C
• Mounting Type: Surface Mount
• Product: Controller Area Network (CAN)
• Maximum Operating Temperature: + 85 C
• Minimum Operating Temperature: - 40 C
• Mounting Style: SMD/SMT
• Ic Function: Standard Protocol Stack Controller
• Brief Features: Includes UART-to-IrDA Standard Encoder/decoder Functionality, Infrared Supported
• Supply Voltage Range: 2V To 5.5V
• Rohs Compliant: Yes
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With: MCP2140DM-TMPSNS - BOARD DEMO FOR MCP2140
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

2.0
The MCP2140A serial interface and IR baud rates are
fixed at 9600 baud, given a 3.6864 MHz device clock.
2.1
Any time the device is powered up
the Power-Up Timer delay
lowed by an Oscillator Start-up Timer (OST) delay
(Parameter
nication with the device may be initiated. This commu-
nication is from both the infrared transceiver’s side and
the controller’s UART interface.
2.1.1
When any state machine is operated outside of its’
specified operating conditions, undesired operation
may occur. Application validation should be done to
determine when the system exits from either a
power-on or a brown-out conditions if the MCP2140A
requires the use of an external voltage supervisory cir-
cuit to ensure proper system operation.
© 2007 Microchip Technology Inc.
DEVICE OPERATION
Power-Up
POWER-ON AND BROWN-OUT
CONDITIONS
32). Once these delays complete, commu-
(Parameter
(Parameter
33) occurs, fol-
D003),
2.2
The MCP2140A is forced into the reset state when the
RESET pin is in the low state. Once the RESET pin is
brought to a high state, the Device Reset sequence
occurs. Once the sequence completes, functional
operation begins.
2.3
The MCP2140A requires a clock source to operate.
This clock source is used to eystablish the device tim-
ing, including the device “Bit Clock”.
2.3.1
The clock source can be supplied by one of the
following:
• Crystal
• Resonator
• External clock
The frequency of this clock source must be
3.6864 MHz (electrical specification
device communication at 9600 baud.
Device Reset
Device Clocks
CLOCK SOURCE
MCP2140A
Parameter
DS22050A-page 7
1A) for