ATF22V10C-15XC Atmel, ATF22V10C-15XC Datasheet - Page 8

• Manufacturer Part Number: ATF22V10C-15XC
• Description: IC PLD EE HP 15NS 24-TSSOP
• Manufacturer: Atmel

Specifications of ATF22V10C-15XC

• Programmable Type: EE PLD
• Number Of Macrocells: 10
• Voltage - Input: 5V
• Speed: 15ns
• Mounting Type: Surface Mount
• Package / Case: 24-TSSOP
• Family Name: ATF22V10C
• Process Technology: EECMOS
• # Macrocells: 10
• # I/os (max): 10
• Frequency (max): 83.3MHz
• Propagation Delay Time: 15ns
• Operating Supply Voltage (typ): 5V
• Operating Supply Voltage (min): 4.75V
• Operating Supply Voltage (max): 5.25V
• Supply Current: 90mA
• Operating Temp Range: 0C to 70C
• Operating Temperature Classification: Commercial
• Mounting: Surface Mount
• Pin Count: 24
• Package Type: TSSOP
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant

7. Programming/Erasing
8. Input and I/O Pin-keeper Circuits
8
ATF22V10C(Q)
Programming/erasing is performed using standard PLD programmers. See “CMOS PLD Pro-
gramming Hardware & Software Support” for information on software/programming.
Table 7-1.
The ATF22V10C contains internal input and I/O pin-keeper circuits. These circuits allow each
ATF22V10C pin to hold its previous value even when it is not being driven by an external source
or by the device’s output buffer. This helps to ensure that all logic array inputs are at known valid
logic levels. This reduces system power by preventing pins from floating to indeterminate levels.
By using pin-keeper circuits rather than pull-up resistors, there is no DC current required to hold
the pins in either logic state (high or low).
These pin-keeper circuits are implemented as weak feedback inverters, as shown in the Input
Diagram below. These keeper circuits can easily be overdriven by standard TTL- or CMOS-com-
patible drivers. The typical overdrive current required is 40 µA.
Figure 8-1.
Parameter
t
V
PR
RST
Programming/Erasing
Input Diagram
Description
Power-up Reset Time
Power-up Reset Voltage
Typ
600
3.8
1,000
Max
4.5
0735S–PLD–8/08
Units
ns
V