DPU-30-0B-E Seiko Instruments, DPU-30-0B-E Datasheet - Page 49

• Manufacturer Part Number: DPU-30-0B-E
• Description: Printers PNL MNT 58MM EZ-OP
• Manufacturer: Seiko Instruments

Specifications of DPU-30-0B-E

• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

ESC – n
GS ! n
Domain of
Domain of
Function
Function
function
function
Details
Details
Code
Code
0 ≤ n ≤ 255
0 ≤ n ≤ 255
1B
Specifies and clears the underline.
n = <xxxxx000>B: underline 0 dot pitch
n = <xxxxx111>B: underline 7 dot pitch
• n is valid only for the low 3 bits.
• This setting is valid only for the standard size characters.
• The underline is added to the width of character and the character spacing.
• This function is not affected by the setting of the amount of line specing.
• If the several underlines with the different thicknesses exist in one line, the
• In default, n = 0.
1D
Specifies the character size.
n = <xxxx0000>B: scaling factor in the vertical direction : × 1 <minimum>
n = <xxxx0111>B: scaling factor in the vertical direction : × 8 <maximum>
n = <0000xxxx>B: scaling factor in the horizontal direction : × 1 <minimum>
n = <0111xxxx>B: scaling factor in the horizontal direction : × 8 <maximum>
• This setting is valid for any type of characters other than HRI characters.
• n is valid only for 0 to 2 bits and 4 to 6 bits.
• In default, n = 0.
thickness of those underlines will be brought into line with the thickest underline.
16
16
+ 2D
+ 21
16
16
+ n
+ n
Underline Specify and Clear
Character Size Set
5-21