DPU-30-0B-E Seiko Instruments, DPU-30-0B-E Datasheet - Page 22
DPU-30-0B-E
Manufacturer Part Number
DPU-30-0B-E
Description
Printers PNL MNT 58MM EZ-OP
Manufacturer
Seiko Instruments
Datasheet
1.DPU-30-0B-E.pdf
(84 pages)
Specifications of DPU-30-0B-E
Lead Free Status / Rohs Status
Lead free / RoHS Compliant
- Current page: 22 of 84
- Download datasheet (636Kb)
3.4.5
When the data with a lot of dots is printed, the print data may be missing and then, the printing may
often continue in the state that each setting by the commands is reset.
This is because too many print dots decrease the voltage, which results in the activation of the reset
circuit of the printer.
The commands which tend to increase the number of print dots are:
Case that a horizontal line is printed when printing a full line of “H” characters without spaces
between the characters.
The print density set command (case that the print density is set at over 100%) expands the length
of strobe, which very often resets the settings, although this command does not increase the
number of print dots. Be aware of these points when using the printer.
3.4.6
1. Input buffer memory
2. User memory
An input buffer memory (RAM) with the capacity of 4,096 bytes is built in the printer.
A user memory (RAM) with the capacity of 16,384 can be used when setting the printer in Mode 3.
The data registered in this memory are cleared when turning off the power.
This memory is used when using the downloaded characters, the user-defined characters, and
the downloaded Bitimages.
The memory used by the downloaded characters and user-defined character is restricted as
follows. The remaining is used for the downloaded Bitimages. However, it can release the
memory of the downloaded character and use-defined character so that ensuring the capacity
for Downloaded Bitimage.
The capacity for the downloaded characters and the user-defined characters is readily ensured
at the initialization.
This area can be released by a command to use the area for the downloaded Bitimages.
When registering the downloaded Bitimages, calculate the remaining capacity of the memory
before registering them.
Be sure that the data with the larger capacity than the remaining capacity is ignored even if you
trying to register such data.
Resetting the Printer While Printing
Memory
• Underline
• Reverse
• Ruled line (in case that the number of dots is many)
• Bitimage
User-defined character
Downloaded character
Downloaded Bitimage
The memory capacity immediately after the initialization
Application
Total
3-8
Capacity (in byte)
10,744
16,384
4,560
1,080
Related parts for DPU-30-0B-E
Image
Part Number
Description
Manufacturer
Datasheet
Request
R
Part Number:
Description:
Printers 2 portable printer USB IrDA Serial
Manufacturer:
Seiko Instruments
Datasheet:
Part Number:
Description:
Printers 2 Port Printer USB IrDA Serial Blueth
Manufacturer:
Seiko Instruments
Datasheet:
Part Number:
Description:
Printers STANDALONE 112MM PORTABLE STANDARD
Manufacturer:
Seiko Instruments
Datasheet:
Part Number:
Description:
Printers STANDALONE 112MM PORTABLE BLUETOOTH
Manufacturer:
Seiko Instruments
Datasheet:
Part Number:
Description:
Printers PANL MNT 3 PARAL
Manufacturer:
Seiko Instruments
Datasheet:
Part Number:
Description:
Printers 112mm Portable Std Printer Kit
Manufacturer:
Seiko Instruments
Datasheet:
Part Number:
Description:
Printers Printer Kit USB
Manufacturer:
Seiko Instruments
Datasheet:
Part Number:
Description:
Printers 112mm Port Blueth Printer Kit
Manufacturer:
Seiko Instruments
Datasheet:
Part Number:
Description:
Printers PNL MNT 3 SRIAL/USB
Manufacturer:
Seiko Instruments
Datasheet:
Part Number:
Description:
Printers Printer Kit USB
Manufacturer:
Seiko Instruments
Datasheet:
Part Number:
Description:
IC RTC I2C 2-WIRE 8-TSSOP
Manufacturer:
Seiko Instruments
Datasheet:
Part Number:
Description:
IC REAL TIME CLOCK 3WIRE 8-SOP
Manufacturer:
Seiko Instruments
Datasheet:
Part Number:
Description:
IC EEPROM 1KBIT 400KHZ 8SOP
Manufacturer:
Seiko Instruments
Datasheet:
Part Number:
Description:
IC EEPROM 64KBIT 400KHZ 8SOP
Manufacturer:
Seiko Instruments
Datasheet:
Part Number:
Description:
IC BATT PROTECTION 2CELL 8-TSSOP
Manufacturer:
Seiko Instruments
Datasheet: