PIC10F202T-I/OT Microchip Technology, PIC10F202T-I/OT Datasheet - Page 12

• Manufacturer Part Number: PIC10F202T-I/OT
• Description: IC PIC MCU FLASH 512X12 SOT23-6
• Manufacturer: Microchip Technology
• Series: PIC® 10Fr

Specifications of PIC10F202T-I/OT

• Program Memory Type: FLASH
• Program Memory Size: 768B (512 x 12)
• Package / Case: SOT-23-6
• Core Processor: PIC
• Core Size: 8-Bit
• Speed: 4MHz
• Peripherals: POR, WDT
• Number Of I /o: 3
• Ram Size: 24 x 8
• Voltage - Supply (vcc/vdd): 2 V ~ 5.5 V
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Processor Series: PIC10F
• Core: PIC
• Data Bus Width: 8 bit
• Data Ram Size: 24 B
• Interface Type: USB
• Maximum Clock Frequency: 4 MHz
• Number Of Programmable I/os: 4
• Number Of Timers: 1
• Operating Supply Voltage: 2 V to 5.5 V
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• 3rd Party Development Tools: 52715-96, 52716-328, 52717-734
• Development Tools By Supplier: PG164130, DV164035, DV244005, DV164005, PG164120
• Minimum Operating Temperature: - 40 C
• Package: 6SOT-23
• Device Core: PIC
• Family Name: PIC10
• Maximum Speed: 4 MHz
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With: AC162059 - HEADER INTRFC MPLAB ICD2 8/14PINAC163020 - ADAPTER PROGRAMMER PIC10F2XXAC164321 - MODULE SKT 6L PM3 SOT23AC164037 - MODULE SKT 6L PROMATE II SOT23
• Eeprom Size: -
• Data Converters: -
• Connectivity: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• Other names: PIC10F202T-I/OTTR

Required Headers
AC162053, AC162054
DS51292R-page 12
Header Identification
The header AC number is used for ordering the header. However, this number is not
on the header board, as the board is often used for multiple headers by inserting
different ICE/ICD devices. To identify these header boards, use the following
information.
Header Setup and Operation – AC162053
For this headers, there are no jumpers/switches. The device with the most program
memory is always selected.
If PIC16F627A or PIC16F628A devices are selected for development in MPLAB IDE,
the warning “Invalid target device ID” may be received in the build window and as a dia-
log. The reason is the PIC16F648A-ICD device supports PIC16F648A, PIC16F627A
and PIC16F628A, but only reports the device ID for the PIC16F648A.
Ignore this warning or disable it under the Warnings tab on the ICD Programming
dialog.
Header Setup and Operation – AC162054
This header supports one device (PIC16F716) so there are no jumpers or switches.
Limitation:
When driving a clock oscillator of more than 4 MHz into OSC1 in HS oscillator mode,
the device will not go into debug mode. Therefore crystal caps will be required. The
32 kHz to 4 MHz range does not have this issue.
AC162053
AC162054
Header
PIC16F648A-ICD
PIC16F716-ICD
ICE/ICD Device
02-01695
Board Assembly Number
© 2009 Microchip Technology Inc.