20-101-0497 Rabbit Semiconductor, 20-101-0497 Datasheet - Page 41

• Manufacturer Part Number: 20-101-0497
• Description: MODULE OP6810 W/O ETH/MEM EXPANS
• Manufacturer: Rabbit Semiconductor

Specifications of 20-101-0497

• Module/board Type: Single Board Computer Module
• Product: Prototyping Accessories
• Processor Type: Rabbit 2000
• Sram: 128 KB
• Flash: 256 KB
• Timers: 8 bit, 10 bit
• Number Of I/os: 24
• Operating Voltage: 9 V to 36 V
• Power Consumption: 1.5 W
• Board Size: 111 mm x 91 mm x 33 mm
• For Use With/related Products: OP6810
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: 20-101-497; 20-101-497

5.1 TCP/IP Connections
Before proceeding you will need to have the following items.
• If you don’t have an Ethernet connection, you will need to install a 10Base-T Ethernet
• Two RJ-45 straight-through Ethernet cables and a hub, or an RJ-45 crossover Ethernet
The Ethernet cables and Ethernet hub are available from Rabbit in a TCP/IP tool kit. More
information is available at www.rabbit.com.
1. Connect the AC adapter and the programming cable as shown in Chapter 2, “Getting
2. Ethernet Connections
• If you do not have access to an Ethernet network, use a crossover Ethernet cable to con-
• If you have an Ethernet connection, use a straight-through Ethernet cable to establish
User’s Manual
card (available from your favorite computer supplier) in your PC.
cable.
Started.”
nect the OP6800 to a PC that at least has a 10Base-T Ethernet card.
an Ethernet connection to the OP6800 from an Ethernet hub. These connections are
shown in Figure 19.
Chapter 5 discusses using the TCP/IP features on the OP6800
boards. The TCP/IP feature is not available on OP6810 versions.
User’s PC
(network of 2 computers)
Ethernet
crossover
cable
Direct Connection
5. U
OP6800
Figure 19. Ethernet Connections
Board
SING THE
Ethernet
cables
Direct Connection Using a Hub
TCP/IP F
Hub
OP6800
Board
EATURES
To additional
network
elements
37