101-0497 Rabbit Semiconductor, 101-0497 Datasheet - Page 37

• Manufacturer Part Number: 101-0497
• Description: MODULAR RABBIT CORE OP6810
• Manufacturer: Rabbit Semiconductor

Specifications of 101-0497

• Rohs Status: RoHS non-compliant
• Module/board Type: Single Board Computer Module
• For Use With/related Products: OP6810
• Other names: Q1912584

4.3 Sample Programs
Sample programs are provided in the Dynamic C
PONG.C
The various directories in the
trate the use of the corresponding Dynamic C libraries.
The
gram has comments that describe the purpose and function of the program. Follow the
instructions at the beginning of the sample program.
To run a sample program, open it with the
and run it by pressing
must be connected to a PC using the programming cable as described in Section 2.1.
More complete information on Dynamic C is provided in the Dynamic C User’s Manual.
TCP/IP specific functions are described in the Dynamic C TCP/IP User’s Manual. Infor-
mation on using the TCP/IP features and sample programs is provided in Section 5,
“Using the TCP/IP Features.”
4.3.1 Board ID
The following sample program can be found in the
•
4.3.2 Demonstration Board
The following sample programs are found in the
•
•
•
User’s Manual
BOARD_ID.C
in the
BUZZER.C
ber to set the jumper across pins 1–2 of header JP1 on the Demonstration Board (see
Figure C-4) to enable the buzzer on. When you finish with
mended that you reconnect the jumper across pins 2–3 of header JP1 on the Demonstra-
tion Board to disable the buzzer.
KEYPAD.C
button is pressed. The corresponding LED on the Demonstration Board will also flash
if a keypad button in the top row of the keypad is pressed. A message is also displayed
on the LCD.
SWITCHES.C
the corresponding pushbutton switch on the Demonstration Board is pressed. A mes-
sage is also displayed on the LCD.
OP6800
demonstrates the output to the
STDIO
folder provides sample programs specific to the OP6800. Each sample pro-
—Demonstrates the use of the buzzer on the Demonstration Board. Remem-
—Flashes the LED above a keypad button when the corresponding keypad
—Detects the type of single-board computer and displays the information
—Flashes the LED on the Demonstration Board and the OP6800 when
window. For the OP6800, the
F9
. The OP6800 must be in Program mode (see Section 3.4) and
Samples
STDIO
folder contain specific sample programs that illus-
File
DEMO_BD
STDIO
menu (if it is not still open), then compile
window.
Samples
SAMPLES\OP6800
window should show
subdirectory in
folder. The sample program
BUZZER.C
SAMPLES\OP6800
subdirectory.
, it is recom-
OP6800
.
33
.