101-0497 Rabbit Semiconductor, 101-0497 Datasheet - Page 15

• Manufacturer Part Number: 101-0497
• Description: MODULAR RABBIT CORE OP6810
• Manufacturer: Rabbit Semiconductor

Specifications of 101-0497

• Rohs Status: RoHS non-compliant
• Module/board Type: Single Board Computer Module
• For Use With/related Products: OP6810
• Other names: Q1912584

2.4 Programming Cable Connections
1. Connect the programming cable to download programs from your PC and to program
Connect the 10-pin
OP6800 RabbitCore module. Ensure that the colored edge lines up with pin 1 as shown.
(Do not use the
Connect the other end of the programming cable to a COM port on your PC. Make a note
of the port to which you connect the cable, as Dynamic C will need to have this parameter
configured. Note that COM1 on the PC is the default COM port used by Dynamic C.
2. Reset the OP6800 by unplugging the AC adapter, then plugging it back in. The OP6800
User’s Manual
and debug the OP6800.
is now ready to be used.
NOTE: Some PCs now come equipped only with a USB port. It may be possible to use an
NOTE: Be sure to use the programming cable (Part No. 101-0513) supplied with the
RS-232/USB converter (Part No. 20-151-0178) with the programming cable supplied
with the OP6800 Tool Kit. Note that not all RS-232/USB converters work with
Dynamic C.
OP6800 Tool Kit—the programming cable has red shrink wrap around the RS-232 con-
verter section located in the middle of the cable. Programming cables from other Rabbit
kits are not designed to work with the OP6800.
DIAG
PROG
connector, which is used for a nonprogramming serial connection.)
Figure 6. Programming Cable Connections
connector of the programming cable to header J1 on the
11