101-0600 Rabbit Semiconductor, 101-0600 Datasheet - Page 21

• Manufacturer Part Number: 101-0600
• Description: COMPUTER SNGLBD BL2510 512K FLSH
• Manufacturer: Rabbit Semiconductor

Specifications of 101-0600

• Module/board Type: Single Board Computer Module
• For Use With/related Products: BL2510
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant

2.5 PONG.C
You are now ready to test your set-up by running a sample program.
Find the file PONG.C , which is in the Dynamic C SAMPLES folder. To run the program,
open it with the
menu (if it is not still open), compile it using the
menu, and
File
Compile
then run it by selecting
in the
menu. The
window will open on the PC
Run
Run
STDIO
and will display a small square bouncing around in a box.
This program shows that the CPU is working. The sample program described in
Section 5.2.3, “Run the PINGME.C Demo,” tests the TCP/IP portion of the board.
2.6 Where Do I Go From Here?
NOTE: If you purchased your BL2500 through a distributor or Rabbit partner, contact
the distributor or partner first for technical support.
If there are any problems at this point:
• Use the Dynamic C
menu to get further assistance with Dynamic C.
Help
• Check the Rabbit Technical Bulletin Board and forums at
www.rabbit.com/support/bb/
and at www.rabbit.com/forums/.
• Use the Technical Support e-mail form at www.rabbit.com/support/.
If the sample program ran fine, you are now ready to go on to explore other BL2500 fea-
tures and develop your own applications.
Chapter 3, “Subsystems,” provides a description of the BL2500’s features, Chapter 4,
“Software,” describes the Dynamic C software libraries and introduces some sample pro-
grams. Chapter 5, “Using the TCP/IP Features,” explains the TCP/IP features.
User’s Manual
15