DC-ME-Y402-LX Digi International, DC-ME-Y402-LX Datasheet - Page 13

• Manufacturer Part Number: DC-ME-Y402-LX
• Description: ME 9210 8MB RAM 4MB FLASH LINUX
• Manufacturer: Digi International
• Type: Network Controller & Processorr

Specifications of DC-ME-Y402-LX

• Module/board Type: Device Server
• Data Rate: 10 Mbps to 100 Mbps
• Memory Type: SDRAM
• Interface Type: Ethernet
• Operating Voltage: 3.3 V
• Operating Current: 346 mA
• Maximum Power Dissipation: 825 mW
• Operating Temperature Range: - 40 C to + 80 C
• Board Size: 36.7 mm x 19.05 mm
• Data Bus Width: 32 bit
• Modulation: CCK, DBPSK, DQPSK
• Product: Modules
• Security: 64/128 bit WEP, TKIP, WPA, WPA2
• For Use With/related Products: Networking
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

13
Connectors: Antenna
Module LEDs
      
The Digi Connect Wi-ME is available with 1 RP-SMA connector. The antenna is
connected to the module with a reverse polarity SMA connector (sub-miniature size A).
The antenna only fits on the module one way to ensure a proper connection. Another option
for both signal reception and design flexibility is to use an antenna extension cord to
separate the antenna from the module. This allows the module to fit inside your product but
the antenna to be placed outside the device.
The module has two LEDs that are located near the upper corners of the Ethernet port (see
the following figure). The following table describes the LEDs.
Note:
Part number
The LEDs are the same for a module with or without a JTAG connector.
Caution: This Part 15 radio device operates on a non-interference basis
with other devices operating at this frequency when using the antennae
listed in the Antenna Specification table. Any changes or modification to
the product not expressly approved by Digi International could void the
user’s authority to operate the device.
Type
Gain
DC-ANT-24DT
Desktop
1.8 dBi
Antenna Specifications
DG-ANT-20DP-BG
Dipole
2 dBi
Antenna Extension Cord
DG-EXT-300-RR
30 cm
-.5dB