20-101-0525 Rabbit Semiconductor, 20-101-0525 Datasheet - Page 55

• Manufacturer Part Number: 20-101-0525
• Description: COMPUTER SINGLE-BOARD LP3500 FOX
• Manufacturer: Rabbit Semiconductor

Specifications of 20-101-0525

• Module/board Type: Single Board Computer Module
• Product: Modules
• Processor Type: Rabbit 3000
• Sram: 512 KB
• Flash: 512 KB
• Timers: 8 bit, 10 bit
• Number Of I/os: 26
• Backup Battery: 3 V Lithium Coin Type
• Operating Voltage: 3 V to 30 V
• Board Size: 93 mm x 66 mm x 11 mm
• Description/function: Computer Module
• For Use With/related Products: LP3500
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: 316-1115

PARAMETERS
SEE ALSO
PARAMETERS
SEE ALSO
User’s Manual
void serCommAlert(int lowpowermode, int
void timedAlert(int lowpowermode, int maxpowermode,
Use this function to poll Serial Port E for any activity or until a timeout occurs. The function call forces
the LP3500 to enter the low-power mode using the battery for polling. Upon expiration of the timeout or
the receipt of a serial byte, this function will enable the normal power mode and exit.
Use devPowerSet(ALLDEVICES, int state) before and after this function call to deactivate
and activate all devices to operate at less power.
lowpowermode is the low-power mode setting to enter, usually 10 (see powerMode())
maxpowermode is the maximum operating power mode setting to enter, usually 1 (see power-
Mode())
powersource
timeout is the timeout in seconds if no activity is detected on the RxE receiver line. Enter 0 for no
timeout
Use this function to poll the real-time clock until a timeout occurs. The function call forces the LP3500 to
enter the low-power mode, disables the normal power source, and may enable the external battery for
polling. Upon expiration of the timeout this function will enable the normal power mode and exit. If the
normal power source is not available, the LP3500 will not be able to resume operation at the maximum-
power mode, and may reset.
Use devPowerSet(ALLDEVICES, int state) before and after this function call to deactivate
and activate all devices to operate at less power.
lowpowermode is the low-power mode setting to enter, usually 10 (see powerMode())
maxpowermode is the maximum operating power mode setting to enter, usually 1 (see power-
Mode())
powersource
timeout is the timeout in seconds if an input is not received.
1 = battery
2 = raw DC power
1 = battery
2 = raw DC power
maxpowermode, int powersource, unsigned long
timeout);
int powersource, unsigned long timeout)
powerMode, digInAlert, timedAlert, devPowerSet
powerMode, digInAlert, serCommAlert, devPowerSet
49