20-101-0672 Rabbit Semiconductor, 20-101-0672 Datasheet - Page 15

• Manufacturer Part Number: 20-101-0672
• Description: MODULE RABBITCORE RCM3600
• Manufacturer: Rabbit Semiconductor

Specifications of 20-101-0672

• Module/board Type: MPU Core Module
• Product: Microcontroller Modules
• Core Processor: Rabbit 3000
• Clock Speed: 22.1 MHz
• Interface Type: Serial
• Flash: 512 KB
• Timers: 10 x 8 bit, 1 x 10 bit
• Operating Supply Voltage: 3 V to 3.6 V
• Board Size: 31 mm x 54 mm x 16 mm
• Core: RCM3600
• Processor Series: RCM3600
• For Use With/related Products: RCM3600
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: 316-1102

2.2.2 Connect Programming Cable
The programming cable connects the RCM3600 to the PC running Dynamic C to down-
load programs and to monitor the RCM3600 module during debugging.
Connect the 10-pin connector of the programming cable labeled
the RCM3600 as shown in Figure 3. Be sure to orient the marked (usually red) edge of the
cable towards pin 1 of the connector. (Do not use the
normal serial connection.)
Connect the other end of the programming cable to a COM port on your PC.
User’s Manual
NOTE: Be sure to use the programming cable (Part No. 101-0542) supplied with this
NOTE: Some PCs now come equipped only with a USB port. It may be possible to use
Development Kit—the programming cable has blue shrink wrap around the RS-232 con-
verter section located in the middle of the cable. Programming cables from other Rabbit
Semiconductor kits are not designed to work with RCM3600 modules.
an RS-232/USB converter (Part No. 540-0070) with the programming cable supplied
with the RCM3600 Development Kit. Note that not all RS-232/USB converters work
with Dynamic C.
Figure 3. Connect Programming Cable and Power Supply
DIAG
connector, which is used for a
PROG
to header J2 on
9