A1383ELHLT-T Allegro, A1383ELHLT-T Datasheet - Page 18

no-image

A1383ELHLT-T

Manufacturer Part Number
A1383ELHLT-T
Description
Manufacturer
Allegro
Datasheets
A1381, A1382,
A1383, and A1384
5,581,179; 5,517,112; 5,619,137; 5,621,319; 5,650,719; 5,686,894; 5,694,038; 5,729,130; 5,917,320; and other patents pending.
mit improvements in the per for mance, reliability, or manufacturability of its products. Before placing an order, the user is cautioned to verify that the
information being relied upon is current.
failure of that life support device or system, or to affect the safety or effectiveness of that device or system.
nor for any in fringe ment of patents or other rights of third parties which may result from its use.
Copyright ©2008, Allegro MicroSystems, Inc.
The products described herein are manufactured under one or more of the following U.S. patents: 5,045,920; 5,264,783; 5,442,283; 5,389,889;
Allegro MicroSystems, Inc. reserves the right to make, from time to time, such de par tures from the detail spec i fi ca tions as may be required to per-
Allegro’s products are not to be used in life support devices or systems, if a failure of an Allegro product can reasonably be expected to cause the
The in for ma tion in clud ed herein is believed to be ac cu rate and reliable. How ev er, Allegro MicroSystems, Inc. assumes no re spon si bil i ty for its use;
Note: Matrix configuration not available for A1381, A1382, and A1383 variants.
14.99
3.02
All dimensions nominal, not for tooling use
Dimensions in millimeters
Exact case and lead configuration at supplier
1.02
MAX
45°
0.43
discretion within limits shown
1
1.27
Package UA, Matrix Leadframe
2
4.09
2.01
3
C
For the latest version of this document, visit our website:
Programmable Linear Hall Effect Sensors with Analog Output
Available in a Miniature Thin Profile Surface Mount Package
B
C
1.44
3X10°
C
0.79
0.41
Package UA, 3-Pin SIP
www.allegromicro.com
A
1.52
45°
A
B
C
15.75
3.02
Active Area Depth, 0.50 mm
Gate and tie bar burr area (for conventional leadframe, gate burr only)
Hall element, not to scale
2.16
MAX
45°
0.43
1
1.27
Package UA, Conventional Leadframe
2
4.09
2.01
115 Northeast Cutoff, Box 15036
Allegro MicroSystems, Inc.
Worcester, Massachusetts 01615-0036 (508) 853-5000
www.allegromicro.com
3
C
B
C
1.44
C
0.79
0.41
A
1.52
45°
18

Related parts for A1383ELHLT-T