CE JMK316 BJ106KD-T Taiyo Yuden, CE JMK316 BJ106KD-T Datasheet - Page 25

• Manufacturer Part Number: CE JMK316 BJ106KD-T
• Description: Cap Ceramic 10uF 6.3VDC X5R 10% SMD 1206 T/R
• Manufacturer: Taiyo Yuden
• Type: Flatr

Specifications of CE JMK316 BJ106KD-T

• Package/case: 1206
• Mounting: Surface Mount
• Capacitance Value: 10 uF
• Dielectric: X5R
• Tolerance: 10 %
• Voltage: 6.3 Vdc
• Product Length: 3.2 mm
• Product Height: 0.85 mm
• Product Depth: 1.6 mm

【Test Methods and Remarks】
【Test Methods and Remarks】
【Test Methods and Remarks】
【Test Methods and Remarks】
■
＊ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
mlcc05_reli_e-01
12． Temperature Cycle （ Thermal Shock）
Specified Value
13． Humidity （Steady state）
Specified Value
14． Humidity Loading
Specified Value
15． High Temperature Loading
Specified Value
Note1
Conditions for 1 cycle／ Step 1: Minimum operating temperature
Number of cycles: 5 times
Measurement shall be conducted : 24±2hrs under the standard condition
Temperature:40±2℃
Humidity:90 to 95% RH
Duration:500
Measurement shall be conducted : 24 ±2hrs under the standard condition
According to JIS C 5102 clause 9.9.
Temperature:40±2℃ Humidity:90 to 95% RH
Duration:500
Applied voltage: Rated voltage
Charge/discharge current:50mA max
Measurement shall be conducted : 24 ±2hrs under the standard condition
According to JIS C 5102 clause 9.10.
Temperature:125±3℃
Duration:1000
Applied voltage: Rated voltage x 2
Charge/discharge current:50mA max
Measurement shall be conducted : 24 ±2hrs under the standard condition
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.
RELIABILITY DATA
Standard condition: Temperature: 5 to 35℃, Relative humidity: 45 to 85 % RH, Air pressure: 86 to 106kPa
＋24
－0
＋24
－0
＋48
－0
hrs
hrs
hrs
Step 2: Normal temperature
Step 3: Maximum operating temperature
Step 4: Normal temperature
When there are questions concerning measurement results, in order to provide correlation data, the test shall be conducted under the following condition.
Temperature: 20±2℃,
Unless otherwise specified, all the tests are conducted under the "standard condition".
Relative humidity: 60 to 70 % RH, Air pressure: 86 to 106kPa
Appearance: No abnormality
Capacitance change: ±2.5% max
Dissipation factor : Initial value
Insulation resistance: Initial value
Withstanding voltage （between terminals） : No abnormality
Appearance: No abnormality
Capacitance change: ±5% max
Dissipation factor : 0.5% max
Insulation resistance 50MΩ μF or 1000MΩ, whichever is smaller
Appearance: No abnormality
Capacitance change: ±7.5% max
Dissipation factor : 0.5% max
Insulation resistance: 25MΩ μF or 500MΩ, whichever is smaller
Appearance: No abnormality
Capacitance change: ±3% max
Dissipation factor : 0.35% max
Insulation resistance: 50MΩ μF or 1000MΩ, whichever is smaller
＋0
－3
＋0
－3
℃ 30±3 min.
℃ 30±3 min.
2 to 3 min.
2 to 3 min.
Note1
Note1
Note1
Note1
1 1
mlcc05_reli-R2