ST626XCKITEU STMicroelectronics, ST626XCKITEU Datasheet - Page 18

• Manufacturer Part Number: ST626XCKITEU
• Manufacturer: STMicroelectronics

Specifications of ST626XCKITEU

• Lead Free Status / Rohs Status: Supplier Unconfirmed

22
Installing the Starter Kit
3 INSTALLING THE STARTER KIT
3.1 Hardware and Software Requirements
To be able to install and run the ST6 Starter Kit, you need a PC with:
• A 3 1/2” Floppy Disk Drive
• A CDROM Disk Drive
• 1.5 Mbytes free memory space
• A free Centronics compatible parallel port connector
• MS-Windows
3.2 Installing the Software
If diskettes are provided, you must install the software with them in order to have the latest re-
lease:
1 Place the SK626XI1 diskette into your floppy disk drive.
2 In Windows Explorer or File Manager, view the contents of the diskette, then double-click
3 Follow the instructions as they appear on screen.
If only the ST62 CDROM is provided, then:Place the ST62 CDROM provided into your
CDROM disk drive.
1 In Windows Explorer or File Manager, view the contents of the CDROM, browse to
2 Follow the instructions as they appear on screen.
3.3 Connecting the Power Supply
If you have AC mains supply, connect the Jack plug on the power supply cable provided to the
J3 input socket, then connect the mains plug to a mains source.
If you have DC mains supply, connect the male plug on the power supply cable provided to the
J3 input socket, then connect the mains plug to a mains source with the following characteris-
tics:
• Voltage: 16V min./20V max.
• Current: 100 mA min.
Note: To avoid a short circuit, always connect the power input cable to the starter kit board be-
fore connecting it to a mains power supply.
18/41
the Setup file or icon.
st62oncd\ftools\sk626Xi1 and double-click the Setup file or icon.
TM
3.11, NT or 95.