MT9JSF25672AZ-1G4D1 Micron Technology Inc, MT9JSF25672AZ-1G4D1 Datasheet - Page 10

• Manufacturer Part Number: MT9JSF25672AZ-1G4D1
• Description: MODULE DDR3 SDRAM 2GB 240UDIMM
• Manufacturer: Micron Technology Inc
• Series: -r

Specifications of MT9JSF25672AZ-1G4D1

• Main Category: DRAM Module
• Module Type: 240UDIMM
• Device Core Size: 72b
• Organization: 256Mx72
• Number Of Elements: 9
• Operating Temp Range: 0C to 70C
• Operating Temperature Classification: Commercial
• Pin Count: 240
• Mounting: Socket
• Memory Type: DDR3 SDRAM
• Memory Size: 2GB
• Speed: 1333MT/s
• Features: -
• Package / Case: 240-UDIMM
• Lead Free Status / Rohs Status: Supplier Unconfirmed

General Description
Fly-By Topology
PDF: 09005aef8360c8e6
jsf9c128_256_512x72az.pdf - Rev. C 9/09 EN
DDR3 SDRAM modules are high-speed, CMOS dynamic random access memory mod-
ules that use internally configured 8-bank DDR3 SDRAM devices. DDR3 SDRAM mod-
ules use DDR architecture to achieve high-speed operation. DDR3 architecture is
essentially an 8n-prefetch architecture with an interface designed to transfer two data
words per clock cycle at the I/O pins. A single read or write access for the DDR3 SDRAM
module effectively consists of a single 8n-bit-wide, one-clock-cycle data transfer at the
internal DRAM core and eight corresponding n-bit-wide, one-half-clock-cycle data trans-
fers at the I/O pins.
DDR3 modules use two sets of differential signals: DQS, DQS# to capture data and CK
and CK# to capture commands, addresses, and control signals. Differential clocks and
data strobes ensure exceptional noise immunity for these signals and provide precise
crossing points to capture input signals.
DDR3 modules use faster clock speeds than earlier DDR technologies, making signal
quality more important than ever. For improved signal quality, the clock, control, com-
mand, and address buses have been routed in a fly-by topology, where each clock,
control, command, and address pin on each DRAM is connected to a single trace and
terminated (rather than a tree structure, where the termination is off the module near
the connector). Inherent to fly-by topology, the timing skew between the clock and DQS
signals can be easily accounted for by using the write-leveling feature of DDR3.
1GB, 2GB, 4GB (x72, ECC, SR) 240-Pin DDR3 SDRAM UDIMM
10
Micron Technology, Inc. reserves the right to change products or specifications without notice.
General Description
©2008 Micron Technology, Inc. All rights reserved.