787446-1 TE Connectivity, 787446-1 Datasheet - Page 2

• Manufacturer Part Number: 787446-1
• Description: BATTERY INTERCONNECT CONNECTOR
• Manufacturer: TE Connectivity

Specifications of 787446-1

• Contact Material: Brass
• Contact Plating: Tin
• Terminal Type: Through Hole
• Leaded Process Compatible: No
• Peak Reflow Compatible (260 C): No
• No. Of Positions: 5
• Rohs Compliant: No
• Product Type: Connector
• Connector Type: Header
• Type Of Connector: Battery Interconnect
• Mount Angle: Vertical
• Pcb Mount Retention: With
• Mounting Holes: Without
• Mount: Printed Circuit Board
• Pcb Mount Style: Through Hole
• Voltage (vac): 50
• Number Of Positions: 5
• Centerline (mm [in]): 5.00 [0.197]
• Voltage Key: Keyless
• Pcb Mount Retention Type: Boardlock(s)
• Contact Type: Blade
• Contact Base Material: Brass
• Contact Plating, Mating Area, Material: Tin-Lead
• Housing Material: Liquid Crystal Polymer (LCP)
• Ul Flammability Rating: UL 94V-0
• Housing Color: Black
• Rohs/elv Compliance: Not ELV/RoHS compliant
• Lead Free Solder Processes: Not suitable for lead free processing
• For Use With: Battery Connections
• Lead Free Status / Rohs Status: No

3.4.
3.5.
Examination of product.
Termination resistance.
Insulation resistance.
Dielectric withstanding voltage.
Temperature rise vs current.
Solderability.
Vibration, random.
Physical shock.
Durability.
Rev B
Performance and Test Description
Product is designed to meet electrical, mechanical and environmental performance requirements
specified in Figure 1. Unless otherwise specified, all tests shall be performed at ambient environmental
conditions per Test Specification 109-1.
Test Requirements and Procedures Summary
Test Description
Meets requirements of product
drawing.
5.5 milliohms maximum.
1000 megohms minimum.
150 vac at sea level.
50 vac at 50000 feet.
30EC nominal temperature rise at
specified current.
Solderable area shall have
minimum of 95% solder coverage.
No discontinuities of 1 microsecond
or longer duration.
See Note.
No discontinuities of 1 microsecond
or longer duration.
See Note.
See Note.
Figure 1 (continued)
MECHANICAL
ELECTRICAL
Requirement
Visual, dimensional and functional
per applicable quality inspection
plan.
TE Spec 109-6-1.
Subject mated contacts assembled
in housing to 50 mv maximum open
circuit at 100 ma maximum.
See Figure 3.
TE Spec 109-28-4.
Test between adjacent contacts of
mated samples.
TE Spec 109-29-1.
Test between adjacent contacts of
mated samples.
TE Spec 109-45-1.
Measure temperature rise vs
current.
See Figure 4.
TE Spec 109-11-2.
Subject contacts to solderability.
TE Spec 109-21-7.
Subject mated samples to 3.13 G's
rms. 20 minutes in each of 3
mutually perpendicular planes.
See Figure 5.
TE Spec 109-26-9.
Subject mated samples to 100 G's
sawtooth shock pulses of 6
milliseconds duration. 3 shocks in
each direction applied along 3
mutually perpendicular planes, 18
total shocks.
See Figure 5.
TE Spec 109-27.
Mate and unmate non-energized
samples for 1000 cycles for battery
housings and 5000 cycles for
headers at maximum rate of 600
cycles per hour.
Procedure
108-1501
2 of 8