CS4351-CZZ Cirrus Logic Inc, CS4351-CZZ Datasheet - Page 30
![IC DAC STER 112DB 192KHZ 20TSSOP](/photos/6/68/66834/cs4351-czz_sml.jpg)
CS4351-CZZ
Manufacturer Part Number
CS4351-CZZ
Description
IC DAC STER 112DB 192KHZ 20TSSOP
Manufacturer
Cirrus Logic Inc
Datasheet
1.CS4351-CZZ.pdf
(37 pages)
Specifications of CS4351-CZZ
Package / Case
20-TSSOP
Number Of Bits
24
Data Interface
Serial
Number Of Converters
2
Voltage Supply Source
Analog and Digital
Power Dissipation (max)
354mW
Operating Temperature
-10°C ~ 70°C
Mounting Type
Surface Mount
Conversion Rate
192 KSPS
Resolution
24 bit
Interface Type
Serial
Operating Supply Voltage
3.3 V/12 V
Operating Temperature Range
+ 70 C
Maximum Power Dissipation
354 mW
Mounting Style
SMD/SMT
Number Of Dac Outputs
2
Lead Free Status / RoHS Status
Lead free / RoHS Compliant
For Use With
598-1152 - BOARD EVAL FOR CS4351 DAC
Settling Time
-
Lead Free Status / Rohs Status
Lead free / RoHS Compliant
Other names
598-1055-5
Available stocks
Company
Part Number
Manufacturer
Quantity
Price
Part Number:
CS4351-CZZ
Manufacturer:
CIRRUS
Quantity:
20 000
Company:
Part Number:
CS4351-CZZR
Manufacturer:
CIRRUSLOGIC
Quantity:
2 549
Part Number:
CS4351-CZZR
Manufacturer:
CIRRUS
Quantity:
20 000
30
6.7.1
6.7.2
6.7.3
Power Down (PDN) Bit 7
Function:
When set to 1 (default), the entire device will enter a low-power state and the contents of the control reg-
isters will be retained. The power-down bit defaults to ‘1’ on power-up and must be disabled before normal
operation in Control Port mode can occur. This bit is ignored if CPEN is not set.
Control Port Enable (CPEN) Bit 6
Function:
This bit is set to 0 by default, allowing the device to power-up in Stand-Alone Mode. Control Port Mode
can be accessed by setting this bit to 1. This will allow operation of the device to be controlled by the reg-
isters and the pin definitions will conform to Control Port Mode.
Freeze Controls (Freeze) Bit 5
Function:
When set to 1, this function allows modifications to be made to the registers without the changes taking
effect until FREEZE is set back to 0. To make multiple changes in the Control Port registers take effect
simultaneously, enable the FREEZE bit, make all register changes, then disable the FREEZE bit.
When set to 0 (default), register changes take effect immediately.
CS4351
DS566F1