TDA8787AHL/C3,157 NXP Semiconductors, TDA8787AHL/C3,157 Datasheet - Page 2

• Manufacturer Part Number: TDA8787AHL/C3,157
• Description: IC INTERFACE ANLG-DGTL 48-LQFP
• Manufacturer: NXP Semiconductors
• Type: CCD (Charged Coupled Device)r

Specifications of TDA8787AHL/C3,157

• Resolution (bits): 10 b
• Sampling Rate (per Second): 18M
• Data Interface: Serial
• Voltage Supply Source: Analog and Digital
• Voltage - Supply: 2.7 V ~ 3.6 V
• Operating Temperature: -20°C ~ 75°C
• Mounting Type: Surface Mount
• Package / Case: 48-LQFP
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: 935276995157

Philips Semiconductors
FEATURES
ORDERING INFORMATION
2002 Oct 25
TDA8787AHL
TYPE NUMBER
Correlated Double Sampling (CDS), Programmable
Gain Amplifier (PGA), 10-bit Analog-to-Digital Converter
(ADC) and reference regulator included
Fully programmable via a 3-wire serial interface
Sampling frequency up to 18 MHz
PGA gain range of 36 dB (in steps of 0.1 dB)
Low power consumption of only 170 mW at 2.7 V
Power consumption in standby mode of 4.5 mW
(typical value)
3.0 V operation; 2.5 to 3.6 V operation for the digital
outputs
Active control pulses polarity selectable via serial
interface
8-bit DAC included for analog settings
TTL compatible inputs, CMOS compatible outputs.
10-bit, 3.0 V, up to 18 Msps analog-to-digital
interface for CCD cameras
LQFP48
NAME
plastic low profile quad flat package; 48 leads; body 7
2
APPLICATIONS
GENERAL DESCRIPTION
The TDA8787A is a 10-bit analog-to-digital interface for
CCD cameras. The device includes a correlated double
sampling circuit, a PGA, clamp loops and a low-power
10-bit ADC, together with its reference voltage regulator.
The PGA gain and the ADC input clamp level are
controlled via the serial interface.
An additional DAC is provided for additional system
controls. Its output voltage range is 1.0 V peak-to-peak
which is available at pin OFDOUT.
DESCRIPTION
Low-power, low-voltage CCD camera systems.
PACKAGE
7
1.4 mm
Product specification
TDA8787A
SOT313-2
VERSION