804-1260 XANTREX TECHNOLOGY, 804-1260 Datasheet - Page 9

• Manufacturer Part Number: 804-1260
• Description: 60A-12V TRUECHARGE 2 SERIES BATTERIE CHARGER XANTREX
• Manufacturer: XANTREX TECHNOLOGY

Specifications of 804-1260

• Battery Charger Type: Switch Mode
• Battery Technologies Supported: Lead Acid
• Supply Voltage: 265VAC
• Charge Current Max: 60A

Important Safety Instructions
R
REFERENCE
EAD AND SAVE THIS
This guide for use by qualified installers only
This chapter contains important safety, installation, and
operating instructions for the Truecharge™ 2 Series Battery
Chargers.
1. Before installing and using a Truecharge™ 2 Battery
WARNING: Risk of injury
To reduce the risk of injury, charge only properly rated (such as
12 V and 24 V) lead-acid (GEL, AGM, Flooded, or lead-
calcium) rechargeable batteries. Other battery types may burst,
causing personal injury and damage.
2. Do not expose the Truecharge™ 2 Battery Charger to
3. This appliance is not intended for use by persons
.
Charger, read all instructions and cautionary markings on
a Truecharge™ 2 Battery Charger unit, the batteries, and
all appropriate sections of this guide.
rain, snow, spray, or bilge water. To reduce risk of fire
hazard, do not cover or obstruct the air intake vent
openings. Do not install the Truecharge™ 2 Battery
Charger in a zero-clearance compartment. Overheating
may result.
(including children) with reduced physical, sensory, or
mental capabilities or lack of experience and knowledge,
unless they have been given supervision or instruction
concerning use of the appliance by a person responsible
for their safety. Children should be supervised to ensure
that they do not play with the appliance.
I
NSTALLATION
G
UIDE FOR FUTURE
vii