804-1260 XANTREX TECHNOLOGY, 804-1260 Datasheet - Page 53

• Manufacturer Part Number: 804-1260
• Description: 60A-12V TRUECHARGE 2 SERIES BATTERIE CHARGER XANTREX
• Manufacturer: XANTREX TECHNOLOGY

Specifications of 804-1260

• Battery Charger Type: Switch Mode
• Battery Technologies Supported: Lead Acid
• Supply Voltage: 265VAC
• Charge Current Max: 60A

Configuring the Battery Bank Type
Using the Onboard Display Panel
Using the Remote Panel
975-0402-01-01
This guide for use by qualified installers only
To configure the battery bank type:
Note: By default, the battery type is set to Flooded.
1. Press and hold the Battery Type Select button for three
2. Select the proper battery type.
To configure the battery bank type:
Note: By default, the battery type is set to Flooded.
1. Press and hold the Status button for five seconds to enter
2. Press Set Max Output button to select the proper battery
3. Press and hold the Status button for five seconds to exit
seconds to advance to the next setting.
The LEDs will indicate which of the four types is being
selected: Flooded (default), GEL, Lead Calc., AGM.
However, if a custom battery type has been programmed
by the OEM, all four LEDs will light up to indicate a fifth
type.
the Setup mode.
Entering the Setup mode will enable you to select the
battery type.
type.
The LEDs will indicate which of the four types is being
selected: Flooded (default), GEL, Lead Calc., or AGM.
However, if a custom battery type has been programmed
by the OEM, all four LEDs will light up to indicate a fifth
type.
the Setup mode.
Configuring the Truecharge™ 2 Battery Charger
2–29