66108-8 TE Connectivity, 66108-8 Datasheet - Page 3

• Manufacturer Part Number: 66108-8
• Description: III+ SKT,26-24,30AU/FL,STRIP
• Manufacturer: TE Connectivity
• Series: Type III+r

Specifications of 66108-8

• Rohs Compliant: YES
• Insulation Support: Yes
• Termination Method To Wire/cable: Crimp
• Wire/cable Type: Discrete Wire
• Grade: Commercial
• High Current: No
• Termination End Plating: Gold Flash
• Pin Diameter (mm [in]): 1.57 [0.062]
• Wire Range (mm [awg]): 0.12-0.24² [26-24]
• Spring Material: Stainless Steel
• Used With: G Series Connectors, M Series Connectors, CPC Connectors
• Contact Type: Socket
• Contact Classification: Signal
• Contact Plating, Mating Area, Material: Gold (30)
• Contact Base Material: Copper Alloy
• Contact Size: 16
• Rohs/elv Compliance: RoHS compliant, ELV compliant
• Lead Free Solder Processes: Not relevant for lead free process
• Rohs/elv Compliance History: Always was RoHS compliant
• Accepts Wire Insulation Diameter, Range (mm [in]): 0.89 – 1.40 [0.035 – 0.055]
• Applies To: Wire/Cable
• Test Current (a): 13.0
• Packaging Method: Strip
• Packaging Quantity: 4,000/Reel

3.6.
Rev B
Durability.
Mating torque.
Unm ating force.
Hum idity-tem perature cycling.
NOTE
Product Qualification and Requalification Test Sequence
NOTE
Test Description
Shall meet visual requirements, show no physical damage, and meet requirements of additional
tests as specified in the Product Qualification and Requalification Test Sequence shown in Figure
2.
(a)
(b)
See paragraph 4.1.A.
Numbers indicate sequence in which tests are performed.
Initial exam ination of product
Dry circuit resistance
Solderability
Vibration
Mechanical shock
Durability
Mating torque
Unm ating torque
Hum idity-tem perature cycling
Final exam ination of product
Test or Exam ination
See Note.
2.26 N•m [20 in-lb] m axim um .
2.26 N•m [20 in-lb] m axim um .
See Note.
ENVIRONMENTAL
Figure 1 (end)
Requirem ent
Figure 2
Test Sequence (b)
3,7
1
5
9
1
6
4
2
8
Test Group (a)
2,4
2
1
3
5
EIA-364-9.
Manually m ate and unm ate
specim ens for 100 cycles at a
m axim um rate of 600 cycles per
hour.
EIA-364-13,
Condition B.
Measure force necessary to m ate
specim ens.
EIA-364-13,
Condition B.
Measure force necessary to
unm ate specim ens.
EIA-364-31.
Subject specim ens to 10, 24 hour
cycles between 25 and 65 C at
95% RH.
3
1
2
3
Procedure
108-10024-5
3 of 4