66108-8 TE Connectivity, 66108-8 Datasheet - Page 2

• Manufacturer Part Number: 66108-8
• Description: III+ SKT,26-24,30AU/FL,STRIP
• Manufacturer: TE Connectivity
• Series: Type III+r

Specifications of 66108-8

• Rohs Compliant: YES
• Insulation Support: Yes
• Termination Method To Wire/cable: Crimp
• Wire/cable Type: Discrete Wire
• Grade: Commercial
• High Current: No
• Termination End Plating: Gold Flash
• Pin Diameter (mm [in]): 1.57 [0.062]
• Wire Range (mm [awg]): 0.12-0.24² [26-24]
• Spring Material: Stainless Steel
• Used With: G Series Connectors, M Series Connectors, CPC Connectors
• Contact Type: Socket
• Contact Classification: Signal
• Contact Plating, Mating Area, Material: Gold (30)
• Contact Base Material: Copper Alloy
• Contact Size: 16
• Rohs/elv Compliance: RoHS compliant, ELV compliant
• Lead Free Solder Processes: Not relevant for lead free process
• Rohs/elv Compliance History: Always was RoHS compliant
• Accepts Wire Insulation Diameter, Range (mm [in]): 0.89 – 1.40 [0.035 – 0.055]
• Applies To: Wire/Cable
• Test Current (a): 13.0
• Packaging Method: Strip
• Packaging Quantity: 4,000/Reel

3.2.
3.3.
3.4.
3.5.
Rev B
Initial exam ination of product.
Final exam ination of product.
Dry circuit resistance.
Solderability.
Vibration, sinusoidal.
Mechanical shock, specified pulse.
Materials
Materials used in the construction of this product shall be as specified on the applicable product
drawing.
Ratings
!
!
Perform ance and Test Description
Product is designed to m eet the electrical, m echanical and environm ental perform ance requirem ents
specified in Figure 1. Unless otherwise specified, all tests shall be perform ed at am bient environm ental
conditions per EIA-364.
Test Requirem ents and Procedures Sum m ary
Test Description
Voltage: 250 volts AC/DC
Tem perature: -55 to 105°C
Meets requirem ents of product
drawing.
Meets visual requirem ents.
4 m illiohm s m axim um change.
Solderable area shall have a
m inim um of 95% solder coverage.
No discontinuities of 1 m icrosecond
or longer duration.
See Note.
No discontinuities of 1 m icrosecond
or longer duration.
See Note.
Figure 1 (continued)
MECHANICAL
ELECTRICAL
Requirem ent
EIA-364.
EIA-364.
Visual and dim ensional inspection
per product drawing.
Visual inspection.
EIA-364-23.
Subject specim ens to 100
m illiam peres m axim um and 20
m illivolts m axim um open circuit
voltage.
EIA-364-52.
Subject contacts to solderability.
EIA-364-28,
Condition IV.
Subject m ated specim ens to 10-
2000-10 Hz traversed in 20 m inutes
with 1.5 m m [0.06 in] m axim um
total excursion. 4 hours in each of 3
m utually perpendicular planes.
See Figure 3.
EIA-364-27,
Condition A.
Subject m ated specim ens to 50 G's
half-sine shock pulses of 11
m illiseconds duration. 3 shocks in
each direction applied along 3
m utually perpendicular planes, 18
total shocks.
See Figure 3.
Procedure
108-10024-5
2 of 4