6-5173280-1 TE Connectivity, 6-5173280-1 Datasheet - Page 5

• Manufacturer Part Number: 6-5173280-1
• Description: AMPLIMITE.050 CAP ASS'Y (V) 30P PB-FREE
• Manufacturer: TE Connectivity

Specifications of 6-5173280-1

• Product Type: Connector
• Pcb Mounting Orientation: Vertical
• Termination Method To Pc Board: Through Hole - Solder
• Pcb Mount Retention: With
• Pcb Mount Alignment: Without
• Shell Type: All Plastic
• Product Series: Series I
• Shielded: No
• Termination Post Length (mm [in]): 3.10 [0.122]
• Number Of Positions: 30
• Pcb Mount Retention Type: Mounting Holes
• Mating Retention: Without
• Centerline (mm [in]): 1.27 [0.050]
• Post Plating: Tin over Nickel
• Contact Plating, Mating Area, Material: Gold (30)
• Contact Base Material: Phosphor Bronze
• Connector Style: Plug
• Mating Alignment: Without
• Housing Material: Thermoplastic - GF
• Ul Flammability Rating: UL 94V-0
• Housing Color: Black
• Rohs/elv Compliance: RoHS compliant, ELV compliant
• Lead Free Solder Processes: Not reviewed for lead free solder process
• Rohs/elv Compliance History: Always was RoHS compliant

ASHL-0005- ES REV A
Para. Test Items
4.6.1
Electrical Requirements
4.6.2
4.6.3
4.6.4
Confirmation of
Product
Termination
Resistance (Low
Level)
Insulation
Resistance
Dielectric Strength
4.5 Performance and Test Descriptions:
4.6 Test Requirements and Procedures Summary:
The product is designed to meet the electrical, mechanical and environmental
performance requirements specified in Fig. 5. All tests are performed at
ambient temperature unless otherwise specified.
AMP Shanghai Ltd
Tyco Electronics
Requirements
Product shall be conforming to the
requirements of applicable product
drawing.
Combination
Horizontal-to-
horizontal
Horizontal-to-
vertical
Vertical-to-vertical 15m
1000 M min. (Initial)
500 M min. (Final)
No abnormalities such as insulation
break-down or flashover shall take
place during the test.
Fig. 5 (To be continued)
Timing
PAGE NO
Initial
Max.
25m
5
After
Test
Max.
50m
30m
108-60036
Procedures
Visually, dimensionally and
functionally inspected per
applicable inspection plan.
Subject mated contacts
assembled in housing to
closed circuit current of 10
mA max. at open circuit
voltage of 50 mV max. Fig. 6.
Measure by applying test
potential between the adjacent
contacts, and between the
contacts and ground in the
mated connector.
MIL-STD-202, Method 302,
Condition B
Measure by applying test
potential between the adjacent
contacts. In the mated
connectors.
MIL-STD-202, Method 301
REV LOC
O
ES