6-5173280-1 TE Connectivity, 6-5173280-1 Datasheet - Page 3

• Manufacturer Part Number: 6-5173280-1
• Description: AMPLIMITE.050 CAP ASS'Y (V) 30P PB-FREE
• Manufacturer: TE Connectivity

Specifications of 6-5173280-1

• Product Type: Connector
• Pcb Mounting Orientation: Vertical
• Termination Method To Pc Board: Through Hole - Solder
• Pcb Mount Retention: With
• Pcb Mount Alignment: Without
• Shell Type: All Plastic
• Product Series: Series I
• Shielded: No
• Termination Post Length (mm [in]): 3.10 [0.122]
• Number Of Positions: 30
• Pcb Mount Retention Type: Mounting Holes
• Mating Retention: Without
• Centerline (mm [in]): 1.27 [0.050]
• Post Plating: Tin over Nickel
• Contact Plating, Mating Area, Material: Gold (30)
• Contact Base Material: Phosphor Bronze
• Connector Style: Plug
• Mating Alignment: Without
• Housing Material: Thermoplastic - GF
• Ul Flammability Rating: UL 94V-0
• Housing Color: Black
• Rohs/elv Compliance: RoHS compliant, ELV compliant
• Lead Free Solder Processes: Not reviewed for lead free solder process
• Rohs/elv Compliance History: Always was RoHS compliant

ASHL-0005- ES REV A
3.3 501-60015 : Product Qualification Test Report
3. Applicable Documents:
3.1 AMP Specifications:
3.2 Military Standard and Specifications:
4. Requirements:
4.1 Structure, Shape and Dimension
The following documents form a part of this specification to the extent specified
here in. In the event of conflict between the requirements of this specification
and the product drawing, the product drawing shall take precedence. In the
event of conflict between the requirements of this specification and the
referenced documents, this specification shall take precedence.
A. 109-1
MIL-STD-202 Test Methods for Electronic and Electrical Component Parts
The product structure, shape and dimensions shall conform to requirements
shown on applicable drawing, unless other wise specified below.
(1) Number of Positions : 9 type in 20,30,34,40,48,50,60,68 and 96 positions
(2) Connector Type:
(3) Pitch and Row :
(4) Mounting on PCB: Screw-on (M2 Screws) Type
(5) Applicable PCB: Board Thickness: 0.8-1.6 mm with solder resistive agent
AMP Shanghai Ltd
Tyco Electronics
Test Specification, General Requirements for Test Methods
: The kink Type is 1.6 mm Thk only.
applied on Solder side.
rows
Board Side: 2.54 mm pitch x1.905 mm in zigzag of 4
Free Standing Type
Retention Leg Type
With Kink Type
Horizontal
Vertical
Engaging Side: 1.27 mm pitch x2.54 mm in 2 rows
PAGE NO
3
108-60036
REV LOC
O
ES