3-644615-5 TE Connectivity, 3-644615-5 Datasheet - Page 2

• Manufacturer Part Number: 3-644615-5
• Description: 05P MTA156 POL HDR ASSY LF
• Manufacturer: TE Connectivity

Specifications of 3-644615-5

• Connector Type: Header
• Product Line: MTA-156
• Pcb Mounting Orientation: Vertical
• Pcb Mount Retention: With
• Mating Connector Lock: With
• Four Points Of Contact: Without
• Shrouded: No
• Mounting Ears: Without
• Mating Connector Lock Type: Polarized Lock
• Pcb Mount Alignment Type: Polarized Retention Peg
• Post Size (mm [in]): 1.14 [.045]
• Panel Mount Retention: Without
• Current Rating (a): 7
• Voltage Rating (vac): 600
• Solder Tail Contact Plating: Tin
• Termination Post Length (mm [in]): 3.18 [0.125]
• Number Of Positions: 5
• Centerline (mm [in]): 3.96 [0.156]
• Narrow: No
• Post Number(s) Omitted: None
• Pcb Mount Retention Type: Boardlock(s)
• Contact Type: Pin
• Contact Shape: Square
• Contact Plating, Mating Area, Material: Tin
• Contact Base Material: Copper Alloy
• Connector Style: Plug
• Housing Color: White
• Mating Alignment: With
• Ul Flammability Rating: UL 94V-0
• Housing Material: Polyester
• Backwall/post Interruption(s): Without
• Rohs/elv Compliance: RoHS compliant, ELV compliant
• Lead Free Solder Processes: Wave solder capable to 240°C, Wave solder capable to 260°C, Wave solder capable to 265°C
• Rohs/elv Compliance History: Always was RoHS compliant
• Applies To: Printed Circuit Board
• Application Use: Wire-to-Board

3.3.
3.4.
3.5.
Examination of product.
Termination resistance.
Insulation resistance.
Dielectric withstanding voltage.
Temperature rise vs current.
Solderability.
Termination tensile strength,
parallel, unmated.
Rev J
Ratings
!
!
!
Performance and Test Description
Product is designed to meet the electrical, mechanical and environmental performance requirements
specified in Figure 1. Unless otherwise specified, all tests shall be performed at ambient environmental
conditions per Test Specification 109-1.
Test Requirements and Procedures Summary
Test Description
Voltage: 600 volts AC
Current: See Figure 4 for applicable current carrying capability
Temperature: -55 to 105° C
Meets requirements of product
drawing and Application
Specification 114-1020.
3 milliohms maximum initial.
∆R 5 milliohms maximum.
5000 megohms minimum initial.
One minute hold with no breakdown
or flashover.
30° C maximum temperatur e rise at
specified current.
Solderable area shall have
minimum of 95% solder coverage.
Wire Size
AWG
26
24
22
20
18
Figure 1 (continued)
MECHANICAL
ELECTRICAL
Requirement
Pounds Minimum
Slot Tensile
12
17
30
5
8
Visual, dimensional and functional
per applicable quality inspection
plan.
TE Spec 109-6-6.
Subject mated contacts assembled
in housing to 20 millivolts maximum
open circuit at 100 milliampers
maximum.
See Figure 3.
TE Spec 109-28-4.
Test between adjacent contacts of
unmated samples.
TE Spec 109-29-1.
2.2 kilovolts AC at sea level.
Test between adjacent contacts of
unmated samples.
TE Spec 109-45-2.
Measure temperature rise vs
current.
See Figure 4.
AMP Spec 109-11-2.
Subject contacts to solderability.
AMP Spec 109-16.
Determine slot tensile strength by
pulling parallel to terminated wire at
maximum rate of 1 inch per minute.
See Figure 5.
Procedure
108-1051
2 of 10