DS1743-70 Maxim Integrated Products, DS1743-70 Datasheet - Page 4
![IC RTC RAM Y2K 5V 70NS 28-EDIP](/photos/6/58/65855/ds1225ab-200__sml.jpg)
DS1743-70
Manufacturer Part Number
DS1743-70
Description
IC RTC RAM Y2K 5V 70NS 28-EDIP
Manufacturer
Maxim Integrated Products
Type
Clock/Calendar/NVSRAM/Y2Kr
Datasheet
1.DS1743W-120.pdf
(16 pages)
Specifications of DS1743-70
Memory Size
64K (8K x 8)
Time Format
HH:MM:SS (24 hr)
Date Format
YY-MM-DD-dd
Interface
Parallel
Voltage - Supply
4.5 V ~ 5.5 V
Operating Temperature
0°C ~ 70°C
Mounting Type
Through Hole
Package / Case
28-DIP Module (600 mil), 28-EDIP
Lead Free Status / RoHS Status
Contains lead / RoHS non-compliant
Other names
DS174370
DS1743/DS1743P Y2K-Compliant, Nonvolatile Timekeeping RAMs
PACKAGES
The DS1743 is available in two packages: the 28-pin DIP and the 34-pin PowerCap module. The 28-pin
DIP-style module integrates the crystal, lithium energy source, and silicon all in one package. The 34-pin
PowerCap Module Board is designed with contacts for connection to a separate PowerCap (DS9034PCX)
that contains the crystal and battery. This design allows the PowerCap to be mounted on top of the
DS1743P after the completion of the surface-mount process. Mounting the PowerCap after the surface-
mount process prevents damage to the crystal and battery due to the high temperatures required for solder
reflow. The PowerCap is keyed to prevent reverse insertion. The PowerCap Module Board and PowerCap
are ordered separately and shipped in separate containers. The part number for the PowerCap is
DS9034PCX.
TIME AND DATE OPERATION
The time and date information is obtained by reading the appropriate register bytes. Table 2 shows the
RTC registers. The time and date are set or initialized by writing the appropriate register bytes. The
contents of the time and date registers are in the BCD format. The day-of-week register increments at
midnight. Values that correspond to the day of week are user-defined, but must be sequential (i.e., if 1
equals Sunday, then 2 equals Monday and so on). Illogical time and date entries result in undefined
operation.
CLOCK OPERATIONS-READING THE CLOCK
While the double-buffered register structure reduces the chance of reading incorrect data, internal updates
to the DS1743 clock registers should be halted before clock data is read to prevent reading of data in
transition. However, halting the internal clock register updating process does not affect clock accuracy.
Updating is halted when a 1 is written into the read bit, bit 6 of the century register (see Table 2). As long
as a 1 remains in that position, updating is halted. After a halt is issued, the registers reflect the count that
is day, date, and time that was current at the moment the halt command was issued. However, the internal
clock registers of the double-buffered system continue to update so that the clock accuracy is not affected
by the access of data. All the DS1743 registers are updated simultaneously after the internal clock register
updating process has been re-enabled. Updating is within a second after the read bit is written to 0.
The READ bit must be a zero for a minimum of 500s to ensure the external registers are updated.
4 of 16