2-964296-1 TE Connectivity, 2-964296-1 Datasheet - Page 5

• Manufacturer Part Number: 2-964296-1
• Description: FLACHSTECKER2,8X0,8
• Manufacturer: TE Connectivity
• Series: Junior-Power-Timer (JPT), Multiple Contact Point (MCP), Sensorr

Specifications of 2-964296-1

• Product Type: Contact
• Mating Area Interface Dimensions (mm [in]): 2.79 x 0.81 [.110 x .032]
• Wire/cable Type: Regular Wire
• Insulation Support: With
• Wire Range (mm [awg]): 1.00-2.50² [17-13]
• Single Wire Sealing System: No
• Tab Type: Symmetric Cantilever Steel Spring
• Insulation Type: FLR (Thin Walled Cable)
• Contact Type: Tab
• Contact Base Material: CuFe2
• Contact Plating, Mating Area, Material: Pre-Tin
• Rohs/elv Compliance: RoHS compliant, ELV compliant
• Lead Free Solder Processes: Not relevant for lead free process
• Rohs/elv Compliance History: Always was RoHS compliant
• Accepts Wire Insulation Diameter, Range (mm [in]): 2.21 – 3.00 [0.087 – 0.118]
• Applies To: Wire/Cable
• Packaging Method: Strip
• Packaging Quantity: 3,300

Housing Ass’y 6p Rec. & Tab Hybrid Jr. Power Timer / Multi Lock
Revisão “B”
4.5.10
4.5.11
ITEM
4.5.7
4.5.8
4.5.9
Terminal from Connector
Body Engagement Force
Temperature Humidity
Terminal to Connector
Extraction Force
Thermal Shock
Thermal Aging
Cycling
TEST
CONNECTOR ELECTRICAL TESTS
.
.
After 1008 hours / 85° C - Thermal Aging;
for service must function without breakage.
for service must function without breakage.
for service must function without breakage.
For terminal ≤2,8mm² Junior Power Timer:
For terminal ≤2,8mm² Junior Power Timer:
For terminal ≤2,8mm² Junior Power Timer:
With Sec. Lock Actuated Measurement;
elements required to separate connectors
elements required to separate connectors
elements required to separate connectors
continuity (resistance >7
For terminal with size 1,5mm² & 2,5mm²:
conditioned by being exposing to 95-
98% Relative Humidity at +40° C for 6
With Sec. Lock Actuated; and After
All mechanical assists and/or other
All mechanical assists and/or other
All mechanical assists and/or other
and After Temperature Humidity
There shall be no loss of electrical
For terminal ≤1,5mm² Multi Lock:
For terminal ≤1,5mm² Multi Lock:
For terminal ≤1,5mm² Multi Lock:
For terminal with size 0,5mm²:
For terminal with size 1,0mm²:
Item 4.5.1 / Item 4.5.3;
Item 4.5.1 / Item 4.5.3
Item 4.5.1 / Item 4.5.3
Primary Lock Only:
REQUIREMENTS
100N minimum.
15N maximum;
20N maximum;
30N maximum.
50N minimum;
90N minimum.
80N minimum;
70N minimum;
90N minimum.
Cycling:
this test;
hours:
> 1 s) during
To submit the samples 10
in housing with a speed of
To extraction the terminal
With the relative humidity
between 45% and 75%.
To insert the terminal in
housing with a speed of
cycles of 24 hours (T. -
To submit the samples
during 1008h/85ºC.
50±10mm/minute.
50±10mm/minute.
30 minute +85ºC
30 minute -40ºC
PROCEDURES
40° C to 85ºC);
100 cycles:
108-37083
5 de 8