K3HB-SSD 24VACVDC Omron, K3HB-SSD 24VACVDC Datasheet - Page 30

• Manufacturer Part Number: K3HB-SSD 24VACVDC
• Description: SENS LINEAR METER DC PROCES INPT
• Manufacturer: Omron
• Series: K3HBr
• Type: Linear Sensor Meterr

Specifications of K3HB-SSD 24VACVDC

• Measuring Range: 0 ~ 20mA, 0 ~ 10V
• Display Style: Green, Red Characters, Black Background
• Display Type: LCD
• Display Face Size: 3.78" L x 1.89" W (96.0 x 48.0mm)
• Display Digits: 5
• Display Digits - Height: 0.193" (4.90mm), 0.559" (14.20mm)
• Backlight: Green, Red
• Mounting Type: Panel Mount
• Termination: Screw Terminals
• Voltage - Supply: 24VAC/DC
• Power Consumption: 7W
• Svhc: No SVHC (15-Dec-2010)
• External Depth: 95mm
• External Length / Height: 48mm
• Ip/nema Rating: IP20
• Operating Temperature Max: 55°C
• Operating Temperature Min: -10°C
• Supply Voltage: RoHS Compliant
• Approval Bodies: CE, CRUus, UL
• Current Consumption: 50mA
• Rohs Compliant: Yes
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With: High-speed, High-precision
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: K3HB-SSD24VACVDC; K3HBSSD24VACVDC

■ Input Compensation/Display
Forces the present value to 0. (Convenient for setting reference val-
ues or deducting tares for weight measurement.)
Shifts the current value measured with a forced zero to 0 again. It is
possible to measure two or more compounds separately and then,
by releasing the tare zero and forced-zero, measure the combined
total.
Compensates for mild fluctuations in input signals due to factors
such as sensor temperature drift, based on OK (PASS) data at mea-
surement. (This function can be used with sampling hold, peak hold,
or bottom hold.).
Changes the display value to 0 for input values less than the set
value. It is enabled in normal mode only. (This function can be used,
for example, to stop negative values being displayed or to eliminate
flickering and minor inconsistencies near 0.)
The display refresh period can be lengthened to reduce flickering
and thereby make the display easier to read.
Values can be displayed in either red or green. With comparative out-
put models, the display color can also be set to change according to
the status of comparative outputs (e.g., green to red or red to green).
Forced-zero
Tare Zero
Zero-trimming
Zero-limit
Display Refresh Period
Display Color Selection
Example) Setting: grn-r
Comparative set value H
Comparative set value L
Zero-limit
L
setting
Display
99.87
110.00
Red
P
100.05
Green
110.00
X V S
V S
X V H S
X V H S
X V H S
X V H S
Red
Input
H
110.01
110.00
The current display value can be selected from the present value, the
maximum value, and the minimum value.
It is possible to specify (i.e., restrict) the values that the smallest dis-
played digit can change by. For example, if the setting is 2, the small-
est digit will only take the values 0, 2, 4, 6, or 8 and if the setting is 5,
it will only take the values 0 or 5. If the setting is 10, it will only take
the value of 0.
Display Value Selection
Step Value
Panel Meter Series
X V H S
X V H S
K3HB
B-37