BTS3205GXT Infineon Technologies, BTS3205GXT Datasheet - Page 4

• Manufacturer Part Number: BTS3205GXT
• Manufacturer: Infineon Technologies

Specifications of BTS3205GXT

• Lead Free Status / RoHS Status: Compliant

Protective Functions
•
•
•
•
Fault Information
•
•
Applications
•
•
•
•
Detailed Description
The device is able to switch all kind of resistive, inductive and capacitive loads, limited by
current capabilities.
The BTS3205G offers ESD protection of the IN Pin in relation to the Source Pin.
The overtemperature protection is in order to prevent the device from overheating due to overload and/or bad
cooling conditions. The temperature information is given by a temperature sensor in the power MOSFET. During
thermal shutdown the device tries to sink an increased input current for feedback the fault condition.
The BTS3205G has a thermal-auto-restart function, the device will turn on again after the measured temperature
has dropped for the thermal hysteresis.
The over voltage protection is active during load-dump or inductive turn off conditions. The power MOSFET is
turned on if the Drain-source voltage gets too high. This function is available without supply.
Data Sheet
Electrostatic discharge protection (ESD)
Active clamp over voltage protection
Thermal shutdown with auto restart
Short circuit protection
Thermal shutdown
Short circuit
Designed for Relays driving in Automotive Applications
All types of resistive, inductive and capacitive loads
Suitable for loads with peak currents
Replaces discrete circuits
4
Smart Low-Side Power Switch
Rev. 1.0, 2007-12-06
E
AS
and maximum
BTS3205G
Overview