BOXD945GTPLKR Intel (CPU), BOXD945GTPLKR Datasheet - Page 41

• Manufacturer Part Number: BOXD945GTPLKR
• Manufacturer: Intel (CPU)

Specifications of BOXD945GTPLKR

• Lead Free Status / RoHS Status: Supplier Unconfirmed

1.12.2.1
1.12.2.2
NOTE
The use of Resume on Ring and Wake from USB technologies from an ACPI state requires an
operating system that provides full ACPI support.
ATX12V-compliant power supplies can turn off the system power through system control. When
an ACPI-enabled system receives the correct command, the power supply removes all non-standby
voltages.
When resuming from an AC power failure, the computer returns to the power state it was in before
power was interrupted (on or off). The computer’s response can be set using the Last Power State
feature in the BIOS Setup program’s Boot menu.
The function/operation of the fan connectors is as follows:
•
•
•
•
•
For information about
The location of the main power connector
The signal names of the main power connector
For information about
The location of the fan connectors
The location of the fan connectors and sensors for thermal monitoring
The signal names of the processor fan connector
The signal names of the chassis fan connectors
The fans are on when the board is in the S0 or S1 state.
The fans are off when the board is off or in the S3, S4, or S5 state.
Each fan connector is wired to a fan tachometer input of the hardware monitoring and fan
control ASIC.
All fan connectors support closed-loop fan control that can adjust the fan speed or switch the
fan on or off as needed.
All fan connectors have a +12 V DC connection.
Power Connector
Fan Connectors
Refer to
Figure 20, page 56
Table 25, page 60
Refer to
Figure 20, page 56
Figure 15, page 37
Table 23, page 59
Table 24, page 59
Product Description
41