PESD0603-240 TE Connectivity, PESD0603-240 Datasheet - Page 9

• Manufacturer Part Number: PESD0603-240
• Description: ESD Protector, 24V, 0603
• Manufacturer: TE Connectivity
• Type: ESDr

Specifications of PESD0603-240

• Number Of Elements: 1
• Operating Temperature Classification: Military
• Clamping Voltage: 45(Typ)V
• Reverse Stand-off Voltage: 24V
• Leakage Current (max): 10uA
• Operating Temp Range: -55C to 125C
• Mounting: Surface Mount
• Pin Count: 2
• Clamping Voltage Vc Max: 45V
• Diode Configuration: Bidirectional
• Diode Case Style: 0603
• No. Of Pins: 2
• Peak Reflow Compatible (260 C): Yes
• Leaded Process Compatible: Yes
• Package / Case: 0603
• Rohs Compliant: Yes
• Capacitance: 0.25 pF
• Current Leakage: 0.01 μA
• Current, Leakage: 0.01 μA
• Input Capacitance: 0.25 pF
• Package: 0303
• Package Type: 0603
• Voltage, Clamping: 75 V
• Voltage, Esd: 15 kV
• Voltage, Operating: 14 V
• Voltage, Supply: 24 VDC
• Voltage, Trigger: 320 V
• Operating Voltage (vdc): 24
• Family Name: PESD
• Form Factor (mm): 1608
• Form Factor (inches): 0603
• Rohs/elv Compliance: RoHS compliant, ELV compliant
• Lead Free Solder Processes: Reflow solder capable to 245°C, Reflow solder capable to 260°C
• Rohs/elv Compliance History: Always was RoHS compliant
• Operating Temperature (°c): -40 – +85
• Lead Free Status / RoHS Status: Compliant

308 Constitution Drive
Menlo Park, CA 94025-1164
Phone: [phone]
www.circuitprotection.com
Warning: Application Limitations for PESD0603-240. This part is not intended to be used on
power lines or for power bus applications. Users should independently evaluate the suitability
of and test each product selected for their own applications
Information furnished is believed to be accurate and reliable. However, users should independently evaluate the suitability of each
product for their applications. Tyco Electronics reserves the right to change or update, without notice, any information contained in this
publication; to change, without notice, the design, construction, processing, or specification of any product; and to discontinue or limit
production or distribution of any product. This publication supersedes and replaces all information previously supplied. Without
expressed or written consent by an officer of Tyco Electronics, Tyco Electronics does not authorize the use of any of its products as
components in nuclear facility applications, aerospace, or in critical life support devices or systems. Tyco Electronics’ only obligations
are those in the Tyco Electronics Standard Terms and Conditions of Sale and in no case will Tyco Electronics be liable for any
incidental, indirect, or consequential damages arising from the sale, resale, use, or misuse of its products.
HDMI is a trademark of HDMI Licensing LLC
Bluetooth is a trademark of Bluetooth SIG
TE Logo and Tyco Electronics are trademarks
© 2008 Tyco Electronics Corporation. All rights reserved.
A 5% saponifier combined with water during wash.
For the ultrasonic process water temperature should be at 50°C and board should be submerged for a minimum
of one minute in the solutions, then rinse and dry.
For in-line washing, the temperature of the water sprayed should be at 110°C, rinse and drying is done in-line.
POST REFLOW, CLEANING CONDITIONS
Raychem Circuit Protection Products
Overvoltage Protection Device
ESD Protector
PRODUCT: PESD0603-240
DOCUMENT: SCD 27256
REV LETTER: C
REV DATE: OCTOBER 9, 2008
PAGE NO.: 9 of 9