LM8M64 Sharp Electronics, LM8M64 Datasheet - Page 6

• Manufacturer Part Number: LM8M64
• Manufacturer: Sharp Electronics

Specifications of LM8M64

• Lead Free Status / RoHS Status: Not Compliant

12) Disassembling the LCD module can cause permanent damage and should be strictly avoided.
10) Avoid to expose the module to the direct sun-light, strong ultraviolet light, etc. for a long time.
11) If stored at temperatures under specified storage temperature, the LC may freeze and be deteriorated.
8)
9) Since leakage current, which may be caused by routing of CCFT cables, etc., may affect the brightness of
If storage temperature exceed the specified rating, the molecular orientation of the LC may change to that of
a liquid, and they may not revert to their original state. Therefore, the module should be always stored at
display, the inverter has to be designed taking the leakage current into consideration. Thorough evaluation of
the LCD module/inverter built into its host equipment shall be conducted, therefore, to ensure the specified
brightness.
agent(dealcohol or deoxym) to prevent change polorizer color owing to gas.
5. Transportation/storage
The measure should be made for storage materials because there is a possibility that the static electricity,
which electrify to human body or storage materials like container by friction or peeling, cause the
dielectric charge.
6. Others
The laminator is attached on the surface of LCD module to prevent from scratches, fouling and dust.
It should be peeled off unhurriedly with using static eliminator.
And also, static eliminator should be installed to prevent LCD module from electrifying at assembling
line.
normal room temperature.
4. Humidity
Humidity of working room may lower electrostatics generating material’s resistance and have something
to prevent electrifying. So, humidity should be kept over 50% because humidity less than 50 % may
increase material’s electrostatic earth resistance and it become easy to electrify.
3. Floor
Floor is a important part to leak static electricity which is generated from human body or equipment.
There is a possibility that the static electricity is charged to them without leakage in case of insulating
floor, so the countermeasure(electrostatic earth:1×10
2. Equipment
There is a possibility that the static electricity is charged to equipment which have a function of peeling
or mechanism of friction(EX: Conveyer, soldering iron, working table), so the countermeasure
countermeasure(electrostaticearth:1×10
1. Operator
Electrostatic shielding clothes shall be had because it is feared that the static electricity is electrified to
Don’t use any materials which emit gas from epoxy resin(amines’ hardener) and silicon adhesive
human body in case that operator have a insulating garment.
SPEC No.
8
Ω) should be made.
LC9
LC9
LC9
LC98109A
8109A
8109A
8109A
8
Ω) should be made.
MODEL No.
LM
LM8M64
LM
LM
8M64
8M64
8M64
PAGE
2 2 2 2