MCIMX287CVM4B Freescale, MCIMX287CVM4B Datasheet - Page 2

• Manufacturer Part Number: MCIMX287CVM4B
• Manufacturer: Freescale

Specifications of MCIMX287CVM4B

• Lead Free Status / RoHS Status: Compliant

The integrated Power Management Unit (PMU) on the i.MX28 is composed of a triple output DC-DC
switching converter and multiple linear regulators, to provide power sequencing for the device and its I/O
peripherals such as memories and SD cards, as well as provide battery charging capability for Li-Ion
batteries.
The i.MX28 processor includes an additional 128-Kbyte on-chip SRAM to make the device ideal for
eliminating external RAM in applications with small footprint RTOS.
The i.MX28 supports connections to various types of external memories, such as mobile DDR, DDR2 and
LV-DDR2, SLC and MLC NAND Flash.
The i.MX28 can be connected to a variety of external devices such as high-speed USB2.0 OTG, CAN,
10/100 Ethernet, and SD/SDIO/MMC.
1.1
The following includes features of the i.MX28:
2
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Patient-monitoring devices, portable medical
Smart energy meters, energy gateways
Media phones, media gateways
ARM926EJ-S CPU running at 454 MHz:
— 16-Kbyte instruction cache and 32-Kbyte data cache
— ARM embedded trace macrocell (CoreSight™ ETM9™)
— Parallel JTAG interface
128 KBytes of integrated low-power on-chip SRAM
128 KBytes of integrated mask-programmable on-chip ROM
1280 bits of on-chip one-time-programmable (OCOTP) ROM
16-bit mobile DDR (mDDR) (1.8 V), DDR2 (1.8 V) and LV-DDR2 (1.5 V), up to 200 MHz DDR
clock frequency with voltage overdrive
Up to eight NAND flash memory interfaces with up to 20-bit BCH ECC
Four Synchronous Serial Ports (SSP) for SDIO/MMC/MS/SPI. Two can be used for
SDIO/MMC/MS interfaces (supports SD2.0, eMMC4.4 and MSPro), and all can be used for the
SPI interface.
Two 10/100-Mbps Ethernet MACs compatible with IEEE Std 802.3™, supporting IEEE
Std 1588™–compatible hardware timestamp and one 3-port L2 switch; also supports
50-MHz/25-MHz clock output for external Ethernet PHY
Two 2.0B protocol–compatible Controller Area Network (CAN) interfaces
One USB2.0 OTG device/host controller and PHY
One USB2.0 host controller and PHY
LCD controller, up to 24-bit RGB (DOTCK) modes and 24-bit system-mode
Pixel-processing pipeline (PXP) supports full path from color-space conversion, scaling,
alpha-blending to rotation without intermediate memory access.
Device Features
i.MX28 Applications Processor Data Sheet for Consumer Products, Rev. 0
Freescale Semiconductor