S29JL032H70TFI420 Spansion Inc., S29JL032H70TFI420 Datasheet - Page 42

• Manufacturer Part Number: S29JL032H70TFI420
• Description: IC,EEPROM,NOR FLASH,2MX16/4MX8,CMOS,TSSOP,48PIN,PLASTIC
• Manufacturer: Spansion Inc.

Specifications of S29JL032H70TFI420

• Data Bus Width: 8 bit, 16 bit
• Architecture: Boot Sector
• Interface Type: Conventional
• Access Time: 70 ns
• Supply Voltage (max): 3.6 V
• Supply Voltage (min): 2.7 V
• Maximum Operating Current: 2 mA
• Mounting Style: SMD/SMT
• Memory Type: Flash
• Memory Size: 32 Mbit
• Operating Temperature: + 85 C
• Package / Case: TSOP-48
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

12. Absolute Maximum Ratings
42
Notes
1. Minimum DC voltage on input or I/O pins is –0.5 V. During voltage transitions, input or I/O pins may overshoot V
2. Minimum DC input voltage on pins A9, OE#, RESET#, and WP#/ACC is –0.5 V. During voltage transitions, A9, OE#, WP#/ACC, and
3. No more than one output may be shorted to ground at a time. Duration of the short circuit should not be greater than one second.
4. Stresses above those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. This is a stress rating only;
Storage Temperature, Plastic Packages
Ambient Temperature with Power Applied
Voltage with Respect to Ground, V
A9, OE#, and RESET#
WP#/ACC
All other pins
Output Short Circuit Current
up to 20 ns. Maximum DC voltage on input or I/O pins is V
pins may overshoot to V
RESET# may overshoot V
+12.5 V which may overshoot to +14.0 V for periods up to 20 ns. Maximum DC input voltage on WP#/ACC is +9.5 V which may overshoot
to +12.0 V for periods up to 20 ns.
functional operation of the device at these or any other conditions above those indicated in the operational sections of this data sheet is
not implied. Exposure of the device to absolute maximum rating conditions for extended periods may affect device reliability.
(Note 1)
(Note 2)
CC
SS
+2.0 V for periods up to 20 ns. See
+0.8 V
–0.5 V
–2.0 V
+2.0 V
+0.5 V
to –2.0 V for periods of up to 20 ns. See
(Note 3)
Figure 12.1 Maximum Negative Overshoot Waveform
2.0 V
Figure 12.2 Maximum Positive Overshoot Waveform
V
V
CC
CC
CC
(Note 1)
S29JL032H
20 ns
D a t a
20 ns
CC
+0.5 V. See
Figure 12.2 on page
S h e e t
20 ns
20 ns
Figure 12.1 on page
Figure 12.1 on page
20 ns
20 ns
42.
42. Maximum DC input voltage on pin A9 is
42. During voltage transitions, input or I/O
–0.5 V to V
S29JL032H_00_B7 July 7, 2008
–0.5 V to +12.5 V
–65°C to +150°C
–65°C to +125°C
–0.5 V to +4.0 V
–0.5 V to +9.5 V
200 mA
CC
SS
+0.5 V
to –2.0 V for periods of