PXB4221EV34NP Infineon Technologies, PXB4221EV34NP Datasheet - Page 64

• Manufacturer Part Number: PXB4221EV34NP
• Manufacturer: Infineon Technologies

Specifications of PXB4221EV34NP

• Data Rate: 2.048Mbps
• Number Of Channels: 1
• Operating Supply Voltage (typ): 3.3V
• Operating Temp Range: -40C to 85C
• Operating Temperature Classification: Industrial
• Lead Free Status / RoHS Status: Not Compliant

4.4.2.3
Before a channel is activated, the Reassembly Buffer must be configured properly to
compensate Cell Delay Variation (CDV).
In order to avoid buffer underflow due to large cell distances the amount of initial
starvation octets that are passed to the framer interface upon arrival of the first cell needs
to be set. On the other hand this number needs to be as small as possible to avoid
excessive delay. The logical Reassembly Buffer size can be adjusted in order to detect
too small cell distances by Reassembly Buffer overflow.
All parameters are defined in the “AAL Transmit Reference Slot” in RAM3. The amount
of starvation octets given to the framer transmit interface after arrival of the first cell is
defined by “starv_ini”. The contents of the starvation octets can be defined by
“starv_bpslct” and the logical Reassembly Buffer size can be configured with “buff_lsize”.
The following sections give an overview on the Reassembly Buffer operation and
initialization.
Unstructured Data Transfer:
After activation of a channel both SAR Receiver and Framer Transmit Interface start
operation. As long as no reassembled cell is available in the Reassembly Buffer it is
considered to be in underflow condition and starvation octets are passed to the Framer
Transmit Interface.
As soon as the first reassembled cell is available in the Reassembly Buffer the device
starts building up the Reassembly Buffer threshold level. This is done by passing an
additional amount of starvation octets to the framer Transmit Interface
Figure 15
Data Sheet
Framer
4
0
Interf.
Filling Level [octets]
Reassembly Buffer
buff_lsize
Starvation octets
Data octets
Initialization of the Reassembly Buffer
T
0
Reassembly Buffer Initialization: No CDV
T
0
+T
S
T
T
T: Average cell distance
0
S
: First cell arrival time
: (starv_ini+1) * 125µs / N
T
0
+T
Example:
part_fill = 16 octets
N = 16
no CDV
64
PXB 4219E, PXB 4220E, PXB 4221E
Operational Description
T
0
+2*T
Reassembly Buffer no CDV
IWE8, V3.4
2003-01-20
Time
Time