1-1734261-0 TE Connectivity, 1-1734261-0 Datasheet - Page 3

• Manufacturer Part Number: 1-1734261-0
• Description: Conn High Performance Interconnect HDR 10 POS 1.25mm Solder RA SMD T/R
• Manufacturer: TE Connectivity
• Type: High Performance Interconnectr

Specifications of 1-1734261-0

• Pitch: 1.25 mm
• Number Of Rows: 1
• Number Of Contacts: 10
• Gender: HDR
• Contact Plating: Tin Over Nickel
• Termination Method: Solder
• Product Type: Connector
• Connector Type: Header
• Mount Angle: Right Angle
• Number Of Positions: 10
• Centerline (mm [in]): 1.25 [0.049]
• Locking Interface: Without
• Post Material: Phosphor Bronze
• Post Plating: Tin over Nickel
• Contact Type: Pin
• Contact Termination Type: Surface Mount
• Contact Base Material: Phosphor Bronze
• Contact Finish: Tin over Nickel
• Connector Style: Plug
• Housing Color: Natural
• Ul Flammability Rating: UL 94V-0
• Housing Material: High Temperature Thermoplastic
• Rohs/elv Compliance: RoHS compliant, ELV compliant
• Lead Free Solder Processes: Reflow solder capable to 245°C, Reflow solder capable to 260°C
• Rohs/elv Compliance History: Always was RoHS compliant
• Packaging Method: 24mm Tape & Reel
• Packaging Quantity: 1,000/Reel

NOTE
10
11
12
13 Humidity-Temperature Cycle See note.
14
15
16
9
Rev
Shall meet visual requirements, show no physical damage, and meet requirements of additional tests
Resistance to Reflow
as specified in the Product Qualification and Rrequalification Test Sequence shown in Figure 2.
C
Temperature Life
Physical Shock
Thermal Shock
Soldering Heat
(Heat Aging)
Solderability
Salt Spray
Test Item
Vibration
No electrical discontinuity greater
than 1 microsecond shall occur.
See note.
No electrical discontinuity greater
than 1 microsecond shall occur.
See note.
See note.
See note.
See note.
The inspected area of each lead
must have 95% solder coverage
minimum.
See note.
Environmental Requirements
Mechanical Requirement
Requirement
Figure 1 (end)
Subject mated connectors to 10-55-10
Hz traversed in 1 minute at 1.52mm
amplitude 2 Hours each of 3 mutually
perpendicular planes, passing DC 1mA
current during the test.
Accelerate Velocity: 490m/s
Waveform: Half-sine shock plus
Duration: 11msec
No. of Drops : 3 drops each to normal
and reversed directions of X,Y and Z
axes, totally 18 drops, passing DC 1mA
current during the test.
Mated Connector
85C°, 250 hours
Mated Connector
-55+/-3C° (30 minutes),
+85+/-2C° (30 minutes)
Making this a cycle, repeat 5 cycles
Mated Connector
25 – 65C°, 95% R.H., 10 cycles
(See Figure 2)
Subject mated connectors to 35+/-2C°
and 5+/-1% salt condition for 48 hours.
After test, rinse the sample with water
and recondition the room temperature
for 1 hour.
Steam Aging Preconditioning:
93°C +3/-5°C, 8 hours ±15 min.
Reflow Temperature: 230 - 245°C
Reflow Time: 50 - 70 s.
JESD22-B102D, Condition C
Moisture Soak Preconditioning:
85°C and 85% RH. for 168 hours.
Preheat Temp.: 150 – 200°C, 60 – 180 s.
Time over liquidus (217°C): 60 – 150 s.
Peak Temp.: 260 +0/-5°C, 20 – 40 s.
Duration: 3 cycles.
Tyco spec. 109-201, Condition B
Procedure
108-57273
2
50G
3 of 4