9-1393792-3 TE Connectivity, 9-1393792-3 Datasheet - Page 464

• Manufacturer Part Number: 9-1393792-3
• Description: Electromechanical Relay DPDT 3A 5VDC 125Ohm Through Hole
• Manufacturer: TE Connectivity
• Type: Signal Relayr

Specifications of 9-1393792-3

• Contact Arrangement: DPDT
• Dc Coil Voltage: 5 V
• Coil Current: 40 mA
• Mounting: Through Hole

1308
Specifications common to all models
Power Consumption: 2.5VA, maximum.
Contact Ratings: 5 amps, resistive, at 120VAC.
Isolation from Control to Sense Inputs: 2,500VAC.
Mechanical Life: 10 million operations.
Shock: 10g.
Vibration: 0.062 (1.57) double amplitude at 10-55 Hz.
Terminals: M3.5 screws.
Maximum Wire Size: 2 x 24 AWG (2.5mm
AWG (1.5mm
Operating Temperature Range: -40 C to +60 C.
Enclosure: Plastic case (not sealed).
Mounting Options: Snap mounts on standard DIN rail (DIN-EN 50022-35)
or panel mounts with M4, M5, #8 or #10 screws.
Weight: 14.4 oz. (400g) approximately.
Overview
The WD series offers several different models of protective relays in a
common package that is suitable for either DIN rail or screw mounting.
These flexible, multifunction devices offer user selectable voltages, sense
currents and frequencies. Adjustable time delays are standard. This allows
a single part number to be suitable for multiple applications, thereby reduc-
ing inventory costs.
Installation and Maintenance Information
Installation: To mount the WD series protective relay on a DIN rail, hook
the top edge of the cutout on the base of the case over one edge of the
DIN rail, then press the opposite side of the cutout containing the release
clip over the opposite side of the DIN rail. To remove or reposition the re-
lay, lever the release clip and move the relay as required. WD series relays
should be installed in a dry location where the ambient temperature will be
within the operating temperature range.
Maintenance: WD series protective relays are solid state devices that re-
quire no maintenance. They are not designed to be serviced by the user.
Consult KILOVAC customer service at 805-220-2023 if repairs should be
necessary.
Dimensions are shown for
reference purposes only.
2
) stranded w/end sleeves.
5 amps, resistive, at 30VDC.
2
Dimensions are in inches over
(millimeters) unless otherwise
specified.
) solid to DIN 46288 or 2 x 16
Catalog 1308242
Issued 3-03
Outline Dimensions
WD
DIN Rail or Screw Mounted
Protective Relays
• WD25 Paralleling (Synch Check) Relays
• WD2759 Over/undervoltage Relays
• WD32 Reverse Power Relays
• WD47 Phase Sequence Relays
• WD5051 Single- or Three-Phase Overcurrent Relays
• WD81OU Over/Underfrequency Relays
Users should thoroughly review the technical data before selecting a product part
number. It is recommended that user also seek out the pertinent approvals files of
the agencies/laboratories and review them to ensure the product meets the
requirements for a given application.
File E58048
(60.0)
Specifications and availability
subject to change.
2.36
(9.0)
0.35
(112.0)
(50.0)
series
1.97
(73.0)
4.41
2.87
M5
M4
DIN EN50022-35
(75.0)
(60.0)
2.95
2.36
16 X M3.5
(35.0)
1.38
www.tycoelectronics.com
Technical support:
Refer to inside back cover.
KILOVAC