9-1393792-3 TE Connectivity, 9-1393792-3 Datasheet - Page 223

• Manufacturer Part Number: 9-1393792-3
• Description: Electromechanical Relay DPDT 3A 5VDC 125Ohm Through Hole
• Manufacturer: TE Connectivity
• Type: Signal Relayr

Specifications of 9-1393792-3

• Contact Arrangement: DPDT
• Dc Coil Voltage: 5 V
• Coil Current: 40 mA
• Mounting: Through Hole

Figure 1 - Limiting Curve for DC Power Load
Dimensions are shown for
reference purposes only.
Features
• 1 NO and 1 NC or 2 Form C contacts.
• High insulation spacing for the safe separation of the contact circuits.
• Sealed case.
• Ideal for emergency shut-off, machine control, elevator and escalator
Initial Dielectric Strength
Between Open Contacts: 1,000V rms.
Between Adjacent Contacts: 4,000V rms.
Between Coil and Contacts: 4,000V rms.
Contact Data @ 23 C
Type: Single button contacts, forcibly guided.
Arrangements: 1 NO and 1 NC or 2 Form C.
Material: Silver-nickel alloy.
Max. Continuous Current at Max. Amb. Temp.: 6A, 1 contact loaded.
Max. Switched Current: See Expected Electrical Life chart.
Max. Switched Voltage: 250VDC.
Max. Switched Power: 1,500VA. (See Fig. 1, Limit Curve for DC Power Load).
Max. Switching Rate: 6 operations/min. at rated load.
Minimum Load: AgNi: >50mW.
Initial Contact Resistance:
Expected Mechanical Life: 10
Expected Electrical Life:
control, light barrier control.
1000
500
100
10
6A @ 250VAC, Resistive, 100,000 ops. @ 70 C amb. temp.;
10/0.5A @ 110VAC, Inductive, 2,000,000 ops. @ 23 C amb. temp.;
6A/230VAC, 100,000 ops. @ 70 C amb. temp.;
6A/24VDC, T
Standard IEC947-5-1 (DC-13), NO contact loaded;
Standard IEC947-5-1 (AC-15), power factor 0.3; switchcycle 0.1 Hz.,
NO contact: 3A/230VAC, inrush current 30A, 6,050 ops.,
NC contact: 1.5A/230VAC, inrush current 15A, 6,050 ops;
3A/24VDC, T
across the inductive load, Standard IEC947-5-1 (DC-13),
NO contact loaded, 1,000,000 ops;
1A/24VDC, T
across the inductive load, Standard IEC947-5-1 (DC-13),
NO contact loaded, 1,500,000 ops.
0.1
0.95
0.95
0.95
Switching Current (Amps DC)
300 operations/min. at minimum load.
= 300ms, switchcycle 0.1 Hz.,
= 144ms, switchcycle 0.33 Hz., Diode (1N4007)
= 300ms, switchcycle 0.33 Hz., Diode (1N4007)
AgNi:
7
operations.
1
100 m
Dimensions are in inches over
(millimeters) unless otherwise
specified.
- 1A/24VDC.
10
Catalog 1308242
Issued 3-03
V23047
SR2M "Safety Relay" - PCB, neutral,
monostable relay with two forcibly
guided contacts.
Users should thoroughly review the technical data before selecting a product part
number. It is recommended that users also seek out the pertinent approvals files of
the agencies/laboratories and review them to ensure the product meets the
requirements for a given application.
Initial Insulation Resistance
Between Mutually Insulated Elements: 10
Coil Data @ 23 C
Voltage: 5 to 110VDC.
Nominal Power: 700mW.
Max. Coil Temperature: 105 C.
Duty Cycle: Continuous.
Coil Data @ 23 C
Max. Allowed Ambient Temp. vs. Applied Coil Voltage
Environmental Data
Temperature Range: -25 C to +70 C.
Solder Bath Temp./Max. Duration: 260 C/5s.
Operate Data @ 23 C
Operate Time: 10 ms (excluding bounce).
Release Time (w/o parallel diode, typ.): 4 ms (excluding bounce).
Bounce Time: 10 ms.
Must Release Voltage: 10% of nominal voltage.
Mechanical Data
Termination: Printed circuit terminals.
Enclosure (94V-0 Flammability Ratings): Sealed plastic case.
Weight: 0.6 oz. (18g).
VDE
Max. Allowable Ambient Temperature ( C)
TUV Rheinland
..
Rated Coil
Voltage
2.0
1.9
1.8
1.7
1.6
1.5
1.4
1.3
1.2
1.1
1.0
0.9
0.8
0.7
0.6
(VDC)
-20
110
File E214024
No. 116064
TUV-Rheinland, No. 945/EZ 116/99
Specifications and availability
subject to change.
12
21
24
36
48
60
80
5
6
9
-10
0 10 20 30 40 50 60 70
17,285
9,143
series
Resistance
1,851
3,291
5,142
116
206
630
823
35.7
(Ohms)
51
Coil
5.1
11.6
20.6
63.0
82.3
1,097
3.6
2,074
185
494
617
Curve 2
Curve 1
Curve 3
Must Operate
Operating
Curve 1 - Must operate voltage
when the coil is not pre-energized.
Curve 2 - Operate voltage raises due
to a pre-energizing with 1.1 x Vnom.
Curve 3 - Maximum allowable voltage.
Release
The must release voltage may fall to
W 5% of Vnom during operation life of
the relay.
Voltage
6
(VDC)
15.8
18
27
36
45
60
83
ohms.
3.75
4.5
6.8
9
Denotes recommended operation
area.
www.tycoelectronics.com
Technical support:
Refer to inside back cover.
Coil Current
SCHRACK
Nominal
140
118
(mA)
78
60
34
30
19.5
14.6
11.7
8.8
6.4
603