PKB4713PINB Ericsson Power Modules, PKB4713PINB Datasheet - Page 45

• Manufacturer Part Number: PKB4713PINB
• Description: Module DC-DC 1-OUT 12V 6A 72W 8-Pin 1/8-Brick
• Manufacturer: Ericsson Power Modules
• Series: PKBr

Specifications of PKB4713PINB

• Package: 81/8-Brick
• Product: Isolated
• Output Power: 72 W
• Input Voltage Range: 36 V to 75 V
• Number Of Outputs: 1
• Output Voltage (channel 1): 12 V
• Output Current (channel 1): 6 A
• Isolation Voltage: 2.25 KV
• Package / Case Size: Eighth Brick
• Output Type: Isolated
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

Soldering Information — Through Hole Mounting
The through hole mount version of the product is intended for
manual or wave soldering. When wave soldering is used, the
temperature on the pins is specified to maximum 270°C for
maximum 10 seconds.
A maximum preheat rate of 4°C/s and a temperature of max
+150°C is suggested. When soldering by hand, care should
be taken to avoid direct contact between the hot soldering
iron tip and the pins for more than a few seconds in order to
prevent overheating.
A no-clean flux is recommended to avoid entrapment of
cleaning fluids in cavities inside the product or between the
product and the host board. The cleaning residues may affect
long time reliability and isolation voltage.
Delivery Package Information, Surface Mount
Version
The surface mount versions of the products are delivered in
antistatic injection molded trays (Jedec design guide 4.10D
standard.
Prepared (also subject responsible if other)
EPANHON
Approved
SEC/D [Julia You]
PKB 4000 series
DC/DC converters, Input 36-75 V, Output 30 A/90 W
Tray Specifications
Material
Surface resistance
Bakability
Tray capacity
Tray thickness
Box capacity
Tray weight
PPE, Antistatic
10
The trays can be baked at maximum
125°C for 48 hours
20 products/tray
13.4 mm [0.528 inch]
100 products (5 full trays/box)
110 g empty, 530 g full tray
5
< Ohm/square < 10
12
Checked
See §1
PROD. SPECIFICATION MECHANICAL
No.
5/1301-BMR 636 Uen
Date
2007-10-15
Delivery Package Information, Through Hole
Mounting Version
The products are delivered in antistatic clamshell.
Non-Dry Pack Information
The through hole mount version of product is delivered in
non-dry packing clamshells.
Dry Pack Information
The surface mount versions of the products are delivered in
trays These inner shipment containers are dry packed in
standard moisture barrier bags according to IPC/JEDEC
standard J-STD-033 (Handling, packing, shipping and use of
moisture/reflow sensitivity surface mount devices).
Using products in high temperature Pb-free soldering
processes requires dry pack storage and handling. In case
the products have been stored in an uncontrolled
environment and no longer can be considered dry, the
modules must be baked according to J-STD-033.
Clamshell Specifications
Material
Surface resistance
Bake ability
Clamshell capacity
Clamshell thickness
Box capacity
Clamshell weight
Technical Specifi cation
EN/LZT 146 394 R5A August 2009
© Ericsson AB
Rev
B
PET with antistatic coated
10
The clamshells are not bake-able.
20 products/clamshell
20 mm [0.787 inch]
100 products (5 full trays/box)
130 g empty, 530 g full tray
6
< Ohm/square < 10
Reference
12
2 (4)
45